Suspension guru's needed! Help with hubs!
11-10-2016, 01:54 AM
#1
Junior Member
Thread Starter
Suspension guru's needed! Help with hubs!
Hey guys I have a 96 F150 and I just picked up some boss wheels that a guy had on his 94 lightning. They fit fine on his truck with the center caps but I get them home and try to put the front wheels on and the hub on the rotor sticks out way far past the center cap. Even with spacers it probably wouldn't go on. What's the deal? Was there some difference in the rotor from a 94 to a 96? If so, can I just swap out steering knuckles and rotors from an older model that would accommodate these wheels? Thanks!
11-10-2016, 02:45 PM
#2
Hey guys I have a 96 F150 and I just picked up some boss wheels that a guy had on his 94 lightning. They fit fine on his truck with the center caps but I get them home and try to put the front wheels on and the hub on the rotor sticks out way far past the center cap. Even with spacers it probably wouldn't go on. What's the deal? Was there some difference in the rotor from a 94 to a 96? If so, can I just swap out steering knuckles and rotors from an older model that would accommodate these wheels? Thanks!
11-10-2016, 10:07 PM
#3
Junior Member
Thread Starter
This is my dilemma. The hub center sticks so far out i can't run the center caps. It looks terrible how far out the hub sticks with the nice chrome wheels on there. This is a 2wd.
This is the truck
Last edited by Powrov1; 11-10-2016 at 10:10 PM.
11-11-2016, 09:37 PM
#5
Really nice truck BTW.
Last edited by VickMacky; 11-11-2016 at 09:58 PM.