need new rear shocks
#2
1994 F150 XLT 5.8L 2wd
I put these, MONROE Part # MA771, on when I did mine. They are adjustable using a schrader valve and can be set between 20-150psi. Can't say specifically that these made the ride better because I did new upper/lower ball joints, 824 springs, inner/outer wheel bearings, rotor/hub assembly, and MONROE Part # 58275 on the front.
Rear
MA771
FWIW these are the ones I put on the front
58275
The MA771, for the rear, were only $55 for the pair. I really like them because if I'm towing or hauling I can set the psi fairly high to keep the bed from dropping to bad, then when not I can lower it so it's not as stiff. The ride quality with my setup is probably nicer than it was from the factory.
Rear
MA771
FWIW these are the ones I put on the front
58275
The MA771, for the rear, were only $55 for the pair. I really like them because if I'm towing or hauling I can set the psi fairly high to keep the bed from dropping to bad, then when not I can lower it so it's not as stiff. The ride quality with my setup is probably nicer than it was from the factory.
The following users liked this post:
Redandgrey150 (01-13-2015)