Lowered truck guys
#1
Junior Member
Thread Starter
Join Date: Jun 2016
Location: Sneads Ferry, NC
Posts: 2
Likes: 0
Received 0 Likes
on
0 Posts
Lowered truck guys
Im currently lowering my 1995 f150. I have done a DJM rear 5in flip. Planning on rear shackles, lowering I-beams and 2in lowering Springs. For a total 5/7 drop.
Anyone done this before and is there any direct fit c-notch kits for these trucks or do I have to use a universal kit or custom?
If you have any pictures of yours drooped or your c-notch please post them up. Thanks
Anyone done this before and is there any direct fit c-notch kits for these trucks or do I have to use a universal kit or custom?
If you have any pictures of yours drooped or your c-notch please post them up. Thanks
#3
1996 F150 Supercab
I like this lowered look. I had been planning on leveling my 1995 SC by raising the front with new 824/844 springs but the last few days have been thinking about lowering the rear as a way to level it.
Not to sound ignorant (I am) but you have dropped the rear 5 inches. Is that right? I was thinking about doing something with the leaf springs to lower mine but I have no real idea what is involved to just drop the rear from stock to better match the front. I looked up the DJM kits. What all was involved with yours as it is pictured? It sounds like you have done nothing to the front yet. Would that be correct?
Any guidance or suggestions would be appreciated.
CADTDI
Not to sound ignorant (I am) but you have dropped the rear 5 inches. Is that right? I was thinking about doing something with the leaf springs to lower mine but I have no real idea what is involved to just drop the rear from stock to better match the front. I looked up the DJM kits. What all was involved with yours as it is pictured? It sounds like you have done nothing to the front yet. Would that be correct?
Any guidance or suggestions would be appreciated.
CADTDI