Cali_ford28

I have 33 inch tires and they rub on the inner fender wheels i know of the spacers but their only one inch my buddy said that the chevy k5 springs will give it the two inches i need is this correct? I need info and advice id appreciate it alot thanks

Golfo

I use moog CC844, these are for F250 and will level your truck.
You can see the diference.

Cali_ford28

Thank you much for the info

th25

There are 2 inch spacers also

LOCO LAPTOP

Golfo, Anything different on the handling with the f250 springs?

th25

Theyre stiffer and make your ride rougher

LOCO LAPTOP

How much rougher?

th25

I havent done it i use spacers. But im sure just like a 3/4 ton truck.

Jeff Campbell

I am going to do either springs or spacers and am having a hard time deciding which to do. Ride height is 36.5 rear and 33.5 front. If the factory fronts come 2 inches lower (4x4) then my front springs have sagged an extra inch since she rolled off the floor. If I put new F250 springs in there wont it wind up raising it 3 inches instead of the 2 most folks are getting? Spacers would give me whatever they are labeled as (1,1.5,2 etc..). Then we gotta talk alignment.... If 250 springs give me 3 inches wont I have trouble getting the truck aligned even with adjustable camber bushings? Maybe a set of used 250 springs would be more what I am looking for. Should give 2 inches of lift and I'd still be able to get her aligned. What do you guys think?

Scraptor

They also increase front roll stiffness, so the truck feels better in corners.