4 inch lift or 6 inch with 33s
#23
Senior Member
With the long radius arms? Why don't you get set of rear springs tall enough to ditch the rear lift blocks?
#25
Originally Posted by Scraptor
With the long radius arms? Why don't you get set of rear springs tall enough to ditch the rear lift blocks?
#26
Off road rebel
#28
Senior Member
i put 33's on my truck stock, but it rubbed to much up front when off road, so i threw in a 2" poly leveling kit spacer and never had a problem. ill be getting a lift to, but if all you want to do is 33's a 2" leveling kit is all you need. no regearing is necessary either, i have 3.31 in my truck and i had no problem getting the one wheel to break loose lol.
with a 4" lift you would be able to clear 35's. this summer i threw a 2" block in the rear (essentially making a 2" lift kit becuase of the front level) and a 3" body. it probablly wouldnt feel to good going over moguls, but i bet i could squeeze 37-38's under there.
btw i did have to shave about an inch off of each corner of the bumper, no big deal though.
with a 4" lift you would be able to clear 35's. this summer i threw a 2" block in the rear (essentially making a 2" lift kit becuase of the front level) and a 3" body. it probablly wouldnt feel to good going over moguls, but i bet i could squeeze 37-38's under there.
btw i did have to shave about an inch off of each corner of the bumper, no big deal though.
#30
Off road rebel
Originally Posted by Scraptor
Which kit was that? Did you build that bumper, what happened to your four door?
Yes I built that bumper...it's not quite done yet.
It's mainly bds suspension parts but I have rough country extended radius arms and sway bar drop brackets. Skyjacker shocks and custom made leaf spring pack.