wiring multiple led pods to one wiring harness
05-30-2018, 12:38 AM
#1
wiring multiple led pods to one wiring harness
i have a set of rigid dually d2 pods already installed and have another set of rigid d series pods i want to install. can i hook my new ones into the already existing wiring harness and run them all off the one 16A switch? if so can you explain how i would go about this? the lights are 30w 2.14 amps according to rigids website https://www.rigidindustries.com/led-lighting/201113 TIA
06-01-2018, 03:09 PM
#2
The switch rating is only 1 part of the equation. You also have to verify your wire gauge is sufficient to handle the load. Beyond that, if it all checks out, verify your fuse is up to the task and won't be undersized for running 4 lights.
If all the above is correct.....then you'll add a couple of wires for your positive to branch to the new lights in a convenient location. Ground the light's negatives. You are done.
If all the above is correct.....then you'll add a couple of wires for your positive to branch to the new lights in a convenient location. Ground the light's negatives. You are done.
The following users liked this post:
Alter_Ego (06-01-2018)
