new HID projectors and C-bar LED switchbacks
I've had a retrofitted headlights in my previous car. almost 4yrs to the date when I bought the truck, I finally tackled this project. purchased on black friday and finally used some vacation time last week to install them. the installation overall was easy, the hardest part was removing the OEM permaseal on the headlights. took some time but got it all done. did it all in one day. I stuck with the same bulbs from factory for now. will probably change them later in the year. the cutoff and output is 10x better than factory. love the cutoff, will get a proper cutoff photo soon. just limited photos. didn't even take any during the install but the projectors are direct swap with zero modification needed. with the EvoX-R 2.0, you can use the same bulbs so no need for new ballast or bulbs and harness.
EvoX-R 2.0 projectors Diode Dynamics C-bar switchbacks https://farm5.staticflickr.com/4735/...875ecf11_c.jpg https://farm5.staticflickr.com/4639/...299c4538_c.jpg |
Damn looks great. Where do you get the switch backs from?
|
Originally Posted by Harshybar
(Post 5640689)
Damn looks great. Where do you get the switch backs from?
|
Damn, wish someone made an install guide for how to do this with pictures. I want to do this as well as paint my housing black, but "'m worried that I'll break something and cost myself 1600 dollars for a new set.
|
Originally Posted by Cam4au
(Post 5943079)
Damn, wish someone made an install guide for how to do this with pictures. I want to do this as well as paint my housing black, but "'m worried that I'll break something and cost myself 1600 dollars for a new set.
|
Originally Posted by yanki01
(Post 5944953)
actually - i'd leave them chrome being you have chrome trim. IMO black with chrome doesn't flow well. just take the lights off - remove all the screws from the back along with all the bulbs. throw them in the oven and crack them open. once you got it open - it's all straight forward.
|
yanki, can you please post a wall photo of your beam?
I have the EvoX-R 1.0 and i used to have such a beautiful blue cutoff, my drivers side bowl has a burn in it and my passenger side beam is now a bit browned as well. I'm thinking of opening mine back up to replace with the 2.0 or the new ZKW-R projectors from Morimoto. |
Originally Posted by jchargu3
(Post 5951351)
yanki, can you please post a wall photo of your beam?
I have the EvoX-R 1.0 and i used to have such a beautiful blue cutoff, my drivers side bowl has a burn in it and my passenger side beam is now a bit browned as well. I'm thinking of opening mine back up to replace with the 2.0 or the new ZKW-R projectors from Morimoto. |
here's a half *****ed output shot. love the color. i put Osram 66340 CBI bulbs in a few months ago. very noticeable compared to the stock HID bulbs which i had for about 4.5yrs.
https://farm2.staticflickr.com/1958/...7ff4ac5b_b.jpg |
All times are GMT -4. The time now is 06:08 AM. |
© 2024 MH Sub I, LLC dba Internet Brands