When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
FX4 - If you swap the mounts you'll end up with a hole on each side that isn't used, but it would allow you to have it on there without the mounts showing to the outside.
Tried that first but the mounts are so low profile the bolts wouldn't fit because the light has to be pivoted up cause the bumper angles down a little in that spot
Tried that first but the mounts are so low profile the bolts wouldn't fit because the light has to be pivoted up cause the bumper angles down a little in that spot
on second thought i might actually do this. I have the same frontend as you and i dont see how I can mount behind the grill without messing with shutters. But i think i'm going to make a custom mount so that i dont have to have the screw/bolt showing
on second thought i might actually do this. I have the same frontend as you and i dont see how I can mount behind the grill without messing with shutters. But i think i'm going to make a custom mount so that i dont have to have the screw/bolt showing
The link for the light bar is on the first page and when your making your mounts make sure they curve like the ones I have but just taller if there straight mounts they won't land on the plastic trim piece
I bought a 30" single row led bar with 9000 lumens by Traveller at Tracktor Supply for $149, not curved but sits in the grille with a little convincing. Wired it to a wireless module by prostrobe $49, which handles all my lights all together or individually and can be strobes or/and dimed.
My dealer installed fox 2.0 coilovers and fox rear shocks. 275/65/20 bfgoodrich ko2s
10-24-2016, 09:08 PM
