Looking for LED tails
#12
Senior Member
Username MAH, had a set made...he put a couple of pictures in this thread:
https://www.f150forum.com/f83/led-tails-238413/index2/
I think he made a separate thread about them also; but I was having trouble finding it.
https://www.f150forum.com/f83/led-tails-238413/index2/
I think he made a separate thread about them also; but I was having trouble finding it.
#15
Senior Member
I just ordered the VLED platinum 21 SMDs. I wanted to go with the Tritons (which I have in the front turn signals), but the Tritons won't fit into the stock tail housing. Their platinums are supposedly pretty bright though. I'll take before & after pix (probably change one side, then take side-by-side w/brake on) and post when installed. Resistors are on back order so it might be another week or so....
#16
Senior Member
Custom tails
I do have a pair of custom made led tails. They were expensive (about $500) but they are bright and work without fault. The only drawback is that I am using the original incandescent bulbs in them as well. I tried a set of Vleds, but they will not fit when placed in the housings and installed back I to the truck. The heat sinks are too large for the cutouts in the truck bed. I will repost some additional pics of these taillights.
As a side, I am looking to get Bil to match the led pattern from the taillights on my new headlights if that is possible.
As a side, I am looking to get Bil to match the led pattern from the taillights on my new headlights if that is possible.
#17
Senior Member
I do have a pair of custom made led tails. They were expensive (about $500) but they are bright and work without fault. The only drawback is that I am using the original incandescent bulbs in them as well. I tried a set of Vleds, but they will not fit when placed in the housings and installed back I to the truck. The heat sinks are too large for the cutouts in the truck bed. I will repost some additional pics of these taillights.
As a side, I am looking to get Bil to match the led pattern from the taillights on my new headlights if that is possible.
As a side, I am looking to get Bil to match the led pattern from the taillights on my new headlights if that is possible.
#19
Senior Member
#20
Senior Member
From my understanding the 09+ tail lights are fused together, they are not like the previous generations where you could put them in the oven. Somebody please correct me if I am wrong but that's what I'm gathering from what I have read.