LED light bar blowing fuses
07-18-2018, 02:25 PM
#1
Junior Member
Thread Starter
Join Date: Jul 2018
Posts: 4
Likes: 0
Received 0 Likes
on
0 Posts
LED light bar blowing fuses
I just wired a 20 inch light bar onto my brush gaurd and it blows the fuse as soon as I hit the switch. It's a 120 Watt bar and I'm using a 5 pin relay, a 3 pole switch, 10 gauge wire into the relay, leftover 16 gauge wire from the relay to the switch, and a 30 Amp in line fuse off the positive terminal of the battery. I don't know much about wiring and it didn't come with any instructions or diagrams. Any help is appreciated.
07-18-2018, 02:52 PM
#2
Senior Member
I just wired a 20 inch light bar onto my brush gaurd and it blows the fuse as soon as I hit the switch. It's a 120 Watt bar and I'm using a 5 pin relay, a 3 pole switch, 10 gauge wire into the relay, leftover 16 gauge wire from the relay to the switch, and a 30 Amp in line fuse off the positive terminal of the battery. I don't know much about wiring and it didn't come with any instructions or diagrams. Any help is appreciated.
