Install LED Lights Front Bumper 18 F150 Question
#1
Junior Member
Thread Starter
Install LED Lights Front Bumper 18 F150 Question
Hello all. First time post from a new guy. I'm installing a set of front bumper mounted ZROADZ 3" LEDs on my '18 F150 King Ranch. I want to tie into the headlights wiring to use high beams as the on/off switch for the new lights. Any thoughts or suggestions on anything I should be concerned with using this plan or should it be a pretty straightforward tie in with no OEM electrical concerns? Thanks for any feedback.
#2
Junior Member
Thread Starter
The answer is, no it's not a good plan to tie into '18 F150 headlight wiring to use high beams for accessory lights on/off switch. System will not be happy. I confirmed before attempting and went with typical wired in cab switch.
#3
Senior Member
You will be fine as long as you're using a relay. You're only using the hi-beam's to signal the relay and not to power the accessories.
I've had my light bar's tied in like this for years with no issues.
I've had my light bar's tied in like this for years with no issues.
#4
Senior Member
Yep, tie into the wiring to switch a relay. No problem. Don't just tie into the wiring without the relay though. That could create problems.