I went to replace one the HID bulbs on my 2013 F150. There appears to be a small plate with 2 small torx type screws that retains the bulb. Can't seem to break the screws loose, I didn't want to twist on them to hard because didn't want to damage the screw heads. Any suggestions?

 

mine came off pretty easy. what about the other screws? were they easy to remove?

 

Mine did stick a little. I used a flex extension and a small torx head bit which squeezed in there okay. Just make sure it's seated in the screw head good and twist away. It's gonna come out. Also, if you're in there and replacing bulbs, check out my thread on the Osram CBB bulbs. I HIGHLY recommend. https://www.f150forum.com/f83/factor...7/#post6198575