jn_h

The lens is 1.75" the length of the projector is 4.75" and it's 4.25" at it's widest point (with included mounting bracket)

bilinvic Retrofits

I wonder if a micro Gatling Gun shroud would fit it?

jn_h

Well I've been at a standstill waiting on TRS to get their H11 3000k bulbs in. But after speaking with Matt I decided to change my order to 6000k to match my heads being built. I'll order the 3000k later if I still feel like having golden fog lights. Hopefully the bulbs and other components I ordered from them will be in by the end of the week. If so ill have them installed by early to mid next week!!

2010_FX4_Lux

Have you opened yours up yet to remove the bottom cutoff shield?

I was hoping to find a way to utilize the existing fog light lens to protect the new projector or fit a lexan cover into the housing.

How well does lexan stand up to rock chips?

jn_h

No I haven't modified it yet, how difficult is it to get apart and back together (well)? I'm wanting to see how well they work with both shields in place before I cut it off. Is it a pretty noticeable difference?

My thought on the lenses is that they are used without lenses on multiple ford models (fusion, flex, mkx...) so why would it be any different on a pickup. I MAY put some lamin-x over it just for a small amount of extra protection but I don't feel it's necessary. Just peace of mind I guess.

jn_h

Pardon the crappy cellphone pic but here's a shot of the drivers side fog light (cutoff against the wall) powered up. It still needs a lil adjusting but is not too far off... These are way better than the stock fog lights. So glad I bought them and took on this project!









FYI
The light your seeing above the cutoff is my switchback led turn signals.

2010_FX4_Lux

What are you using for a bulb?

jn_h

For now I'm using TRS' h11 6000k but as soon as they are back in stock I will swap them to 3000k.

jn_h

Here's some installed day shots with my extra "flare" from TRS!

terraformer

Looking good!