Originally Posted by mdula

Im sorry I have to say something, this guy is the biggest hack job.


I hate being this person, a "troller" or someone to take time speaking negatively about someone who seems to be trying to start a small business. But F150LEDs.com is a joke. There is a good reason that his comments are disabled on youtube, basically doing electrical work how I did when I was 16 and to this day regret it. I just spent some time watching his install videos looking for LED ideas for my 2013. His kits consist of off the shelf parts you can get at a local autozone, pep boys. Hell, his mirror turn signal kit literally comes with a bent coat hanger to run the wires.


The cup holder and interior "accent" lighting kit comes with a clear RTV silicon tube, alcohol wipes and a remote LED module with a sticker over the top that he jams 10 wires into 2 terminals. Nothing is soldered or has pre-made terminals but comes with the shi! job plastic splices.


The cup holder kit comes with a get-anywhere LED rope light that is RTV clear silicone JAMMED in the crack between the lower and upper recessed mating surface of the cup holder in the console. The silicon RTV is all gooped up and even on the how-to video you can see the silicon gooped over the edge, uneven and smeared over the inside of the cup holders. The robe light is too long of coarse so the rest just gets to dangle in your console.


God. Watching him run the power wire to the running light turn signal LEDs made me cringe. The power wire, run through the door, down TO the rubber conduit between your door and body in the jam, he gets the wire to the rubber loom, and drills a hole through it to loom to run the wire along the OUTSIDE rather than run it through the wire loom as it was intended. Now you get to see a bare wire looping in your door jam when opened.


Hell, when the wire was ran from the driver mirror he ran it ACROSS (not alongside) the under side of the rubber weather stripping over a nice sharp welded body seam lol, so open and close your door enough times and that edge will cut the wires sheath and arc.


I was intrigued enough to watch the videos only in horror to watch him hack the hell out of a nice, what appears to be platinum F150.


This is an above average do-it-yourselfer that decided to make a business packing up "stuff" an telling you how to hack up your electrical in your truck. I'd be surprised to see that this is even a legitimate company with a valid tax ID...rather some guy with a web site.


Run away.

Originally Posted by That_Hal

this is just pure trolling... Really sad that you S on someone without even experiencing the buissness... I have bought multiple products from them and when I did have an issue there customer service was beyond Good! I have been blown away by them. So because YouTube videos you crap on someone... Hope no one listened to you.

Originally Posted by 4x4TruckLEDS.com

I don't like mdula's comments either, maybe he had a bad experience with them and is venting. I bought their lights before I started my company, had issues with the lights and they got back to me right away, but the reason I didn't stick with their lights was because I got water in my lenses and the bulbs started to fail (i returned the LED lights for the headlights, kept some of the others). I agree that the designs they came up with to make them WORK for the Fords, were not though out. I wouldn't call them a hack job though. I got water in my housing and I learned later they were the WRONG style headlihts to use (they do use a quality kit now same as ours)

What I find interesting though is that "That Hal"'s first response on this forum was to come right for this thread, an old thread? You must have had to search the forum to find this thread and dig it up, as it's an older one... interesting to say the least... why you would look up this old thread and make it your FIRST post on this forum... yeahhhhhhhhh