When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Hey guys I ended up going with a bar from Rough country. Dual row 20" with harness for $220 american. It ended up going in pretty well. Its actually wider than most 20" bars I've seen online being 22.2" wide so it was a really nice and snug fit in the opening (I used the bolts provided to secure it to the license plate bracket mounting area clipping the edges of the bar. It doesn't move without a lot of force). I'll post some pics below.
Hey guys I ended up going with a bar from Rough country. Dual row 20" with harness for $220 american. It ended up going in pretty well. Its actually wider than most 20" bars I've seen online being 22.2" wide so it was a really nice and snug fit in the opening (I used the bolts provided to secure it to the license plate bracket mounting area clipping the edges of the bar. It doesn't move without a lot of force). I'll post some pics below.
Looking to grab a 20" bar that is decent quality and will get a little bit of work but isn't $800+ such as the RI ones. I understand you pay for what you get but does anyone have any experience with a cheaper bar that didn't have it out of the box or only a couple hours of work with burnouts?
I found this for about $106, shipped no tax. With switch and harness. Dual row, CREE LED 22" 120 watt. Looked for just some extra light for traveling down my 5 mile dirt road to my VT camp. The price says it's not the best on the market but it seems to work very well, appears well made, and I think it looks good.
Light on!
I used a a piece of 1/2" flat steel stock covered in 1/2 In foam pipe insulation behind the grill. The foam is a nice cushion. No drilling or cutting. Switch did require drilling and was installed just to the lower right of the steering wheel.
10-25-2015, 05:40 PM
