Bulb Suggestions 2018
#1
Member
Thread Starter
Bulb Suggestions 2018
As the title says I have an 18' and I am simply looking for suggestions or recommendations from anyone who has swapped out their stock bulbs. User experience is greatly appreciated! I had a set of PIAA's in my 2012 before trading it that were ok considering the price.
#2
Senior Member
Take a look at ESSK Customs. I have these as my highs, lows and fogs...
https://esskcustoms.com/collections/...conversion-kit
No flickering and they fit under the stock dust caps.
I also have these for my front signals...
https://esskcustoms.com/collections/...nt=13995766915
Then, if you haven't looked into it already, you can use Forscan to enable Bambi mode (highs, lows and fogs on at the same time) if you like and also turn off the hyperflash for the turn signals if you do replace them with leds (no wiring in resistors).
https://esskcustoms.com/collections/...conversion-kit
No flickering and they fit under the stock dust caps.
I also have these for my front signals...
https://esskcustoms.com/collections/...nt=13995766915
Then, if you haven't looked into it already, you can use Forscan to enable Bambi mode (highs, lows and fogs on at the same time) if you like and also turn off the hyperflash for the turn signals if you do replace them with leds (no wiring in resistors).
#3
Member
Thread Starter
Take a look at ESSK Customs. I have these as my highs, lows and fogs...
https://esskcustoms.com/collections/...conversion-kit
No flickering and they fit under the stock dust caps.
I also have these for my front signals...
https://esskcustoms.com/collections/...nt=13995766915
Then, if you haven't looked into it already, you can use Forscan to enable Bambi mode (highs, lows and fogs on at the same time) if you like and also turn off the hyperflash for the turn signals if you do replace them with leds (no wiring in resistors).
https://esskcustoms.com/collections/...conversion-kit
No flickering and they fit under the stock dust caps.
I also have these for my front signals...
https://esskcustoms.com/collections/...nt=13995766915
Then, if you haven't looked into it already, you can use Forscan to enable Bambi mode (highs, lows and fogs on at the same time) if you like and also turn off the hyperflash for the turn signals if you do replace them with leds (no wiring in resistors).
#4
Senior Member
I am up in Grande Prairie.
High beam - 9005
Low Beam - H11
Fogs - H10
Front turns - 7440
I had the Morimoto fogs and sold them..didn't impress me at all.
ESSK has top knotch customer service, too.
High beam - 9005
Low Beam - H11
Fogs - H10
Front turns - 7440
I had the Morimoto fogs and sold them..didn't impress me at all.
ESSK has top knotch customer service, too.
The following users liked this post:
bigden75 (05-30-2018)