When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
That's a bummer. As stated earlier, I questioned that being the fix for the problem. The capacitors are for actual flickering. Your lights are not flickering, they're turning off.
The lack of responses leads me to believe it would be difficult to diagnose without someone knowing what they're doing having actual hands on everything. Sorry I couln't be of more help.
All good I’m calling TRS when they open tomorrow, they haven’t turned off but the passenger light doesn’t turn on sometimes.
So I’ve tried googling left and right but do our trucks have horizontal alignment? My retrofits seem to be almost to far apart. Any tips for these things to finally be aligned straight?
So I’ve tried googling left and right but do our trucks have horizontal alignment? My retrofits seem to be almost to far apart. Any tips for these things to finally be aligned straight?
No left/right adjustment. Only up/down. The distance between the two "hotspots" doesn't really matter.
Now if it is a retrofit with new projectors installed and the cutoff isn't level (on lowbeam), that could be an issue depending on how bad off it is. A successful retrofit is dependent on making sure the projectors (cutoff shield) are mounted level in the headlight assembly before resealing the lens.
No left/right adjustment. Only up/down. The distance between the two "hotspots" doesn't really matter.
Now if it is a retrofit with new projectors installed and the cutoff isn't level (on lowbeam), that could be an issue depending on how bad off it is. A successful retrofit is dependent on making sure the projectors (cutoff shield) are mounted level in the headlight assembly before resealing the lens.
In all honesty it looks like the lights are just spread apart. That’s what I’m trying to fix and I never should have taken it somewhere but I wanted the piece of mind of a warranty, and I really just screwed myself.
Hey guys, hoping for some feedback on an issue I'm having with a diode dynamics HID kit. I'm using their h7 kit in my anzo switchbacks 2016 XLT.
The left low beam randomly doesn't come on. I tried emailing them and their rec was to swap the right bulb to see if it's a bulb issue. Which wouldn't be a big deal if it was doing it all the time and if accessing the bulbs wasn't such a pain.
Anybody experience a similar issue? Wondering if it's the bulb or ballast. Appreciate the help in advance.
02-12-2018, 10:35 AM
