2020 XLT Sub setup best way?
Thread Starter
5 Year Member
Joined: Apr 2011
Posts: 1,472
Likes: 280
From: Chicago, IL
2020 XLT Sub setup best way?
Need some advise on my sub setup. I am by no means super knowledgeable on this stuff and not looking for a top of the line setup, just some bass to help fill in. My truck is a 2020 XLT 301a so I don't have the Sony or B&O system.
Everything works but if I am reading correctly there may be a harness I can use to get more of a factory level setup. Link below is what I have, there are 2 of these subs behind my rear seat. Is there a better way to setup these and if so can someone walk me through or post a link/video?
How this is setup is installed
1.) ran 10guage wire from subs to battery.
2.) used the rear seat bolts for ground.
3.) used a fuse tap for the remote wire.
4.) tapped into the rear speaker wires in the b pillar for signal.
Sound Ordnance B-8PTD 8" Powered Subwoofer
Everything works but if I am reading correctly there may be a harness I can use to get more of a factory level setup. Link below is what I have, there are 2 of these subs behind my rear seat. Is there a better way to setup these and if so can someone walk me through or post a link/video?
How this is setup is installed
1.) ran 10guage wire from subs to battery.
2.) used the rear seat bolts for ground.
3.) used a fuse tap for the remote wire.
4.) tapped into the rear speaker wires in the b pillar for signal.
Sound Ordnance B-8PTD 8" Powered Subwoofer
