2018 F150 ANZO Switchbacks
#82
Senior Member
#84
Senior Member
#85
Senior Member
Are you going to leave that curved middle section of the Anzo Drl off like that or will you power the full section of both the inner and outer Drl? Also, are you upgrading the halogen projectors as well? If so, which projectors will you be using? Thanks. Great work so far.
#86
Senior Member
Are you going to leave that curved middle section of the Anzo Drl off like that or will you power the full section of both the inner and outer Drl? Also, are you upgrading the halogen projectors as well? If so, which projectors will you be using? Thanks. Great work so far.
#88
Senior Member
not too bad.. one screw on the outer end.. 3 screws for the bottom bracket.. put them in the oven 220 degrees for 13 mins then started to work my way with a pry tool and then pulled them apart .. once apart another 6 screws to remove the black trim piece .. then drilled 2 holes to slide the halo through the trim piece ... then drilled small holes in teh trim piece then used black wire to secure it
#90
Senior Member
finally done