Marty300

Was trying to lower my drivers side headlight beam, tired of getting flashed running led bulbs. So last night I was turning on the adjuster, got the bulb down almost where it needed to be and then "pop", the headlight went back up to where it was and it appears the adjuster "unscrewed" from the housing OR did I break the damn thing?

Marty

PARIAH

What happens when you try to turn the adjuster now?

You may also get better results moving this thread out of the aftermarket section for more views.

eyecandynsx

You cant adjust glare, which is why you're getting flashed. Go back to better halogens like your lights were designed for or else get DD SL1 which were designed on these F150's.

djfllmn

iTrader: (1)

^this

Marty300

Main reason I wanted to lower them was the 6 inch lift and bigger tires I put on a few months ago. Dont get flashed too much by the cars, its been the big rigs. Its lower than it was but now does doesnt move it. If I get some time going to pull the headlight out of the truck for a better look.

Marty

artsr2002

You have LEDs in your truck and have a 6 inch lift on it and only big rigs flash you? Hmmmm.