Trailer status not displaying!
02-09-2019, 11:03 AM
#1
Member
Thread Starter
Trailer status not displaying!
On my dash display my trailer status is blank. It worked a few day s ago. It will display which trailer is connected and miles traveled etc. when I start the truck it says that a trailer is connected. But when I select trailer status it’s blank. Any ideas? 2017 SC 3.5 Eco Boost pulling 2019 Lance 1985.
02-10-2019, 07:55 AM
#2
Senior Member
Try to set up trailer info in dash again and see if it correct this. Mine was always adding miles when not connected, reset all the information and it worked properly.
Dielectric grease on 7 pin could help too
Dielectric grease on 7 pin could help too
Last edited by Bluewoo; 02-10-2019 at 08:01 AM.
02-11-2019, 08:28 AM
#3
Member
Thread Starter
HaHa, my fault! I didn't "Select" the trailer on the other menu. Once I selected the Lance, all was well. I thought that I had deleted our old Jayco trailer but it was still an option as was the Lance so after I selected the Lance it worked fine. Thanks.
02-11-2019, 05:02 PM
#4
Senior Member
