Topic Sponsor
Towing/ Hauling/ Plowing Discuss all of your towing and/or cargo moving experiences here.
Sponsored by:
Sponsored by:

BLISS not working w/ Conv Trailer

Old 05-12-2018, 01:00 PM
  #1  
Junior Member
Thread Starter
 
NCost's Avatar
 
Join Date: May 2018
Posts: 11
Received 5 Likes on 5 Posts
Question BLISS not working w/ Conv Trailer

Alright, sorry to post a question right after joining but I can't figure this out.

I have a conventional trailer (6/12 x 10 bed), have set it up for my Backup assist, register it as conventional and all numbers entered. Trailer is 13 feet total so I enter 16 feet for the BLISS as I've read to add 3 feet.
When I use my trailer it tells me cross traffic and BLISS is disabled. I go into the Trailer settings to turn on BLISS and it tells me no conventional trailer stored. I deleted and recreated the trailer 3x and still the same thing.

My number are:
A = 11"
B = 16.5"
C = 41.5"
D = 119"
Trailer Length = 13' so use 16'

This is driving me nuts. Have a long trip with it in July and would like to have BLISS working as it's all highway driving. Anyone?
The following users liked this post:
jlfliberty (02-10-2023)
Old 05-12-2018, 02:46 PM
  #2  
Senior Member
 
Ricktwuhk's Avatar
 
Join Date: Dec 2013
Location: SE Michigan
Posts: 14,966
Received 5,988 Likes on 3,552 Posts

Default

BLIS...

Is your F-150 at 2017 or 2018? Older BLIS will not work with trailer...
Old 05-12-2018, 02:48 PM
  #3  
Junior Member
Thread Starter
 
NCost's Avatar
 
Join Date: May 2018
Posts: 11
Received 5 Likes on 5 Posts
Default

It's a 2018 and is supposed to work w/ a conventional trailer, which I selected when I set the trailer up.
The following users liked this post:
timtoolman (12-23-2022)
Old 05-12-2018, 02:53 PM
  #4  
Senior Member
 
Ricktwuhk's Avatar
 
Join Date: Dec 2013
Location: SE Michigan
Posts: 14,966
Received 5,988 Likes on 3,552 Posts

Default

https://owner.ford.com/how-tos/vehic...250&sync=sync3

Make sure when you connect the trailer that it's picked the right trailer profile, or switch to it.
Old 05-12-2018, 05:39 PM
  #5  
Junior Member
Thread Starter
 
NCost's Avatar
 
Join Date: May 2018
Posts: 11
Received 5 Likes on 5 Posts
Default

Thanks I'll double check but I only have one trailer set up but will do so. I do know I've gone in and hit select trailer and pick my programmed trailer and it's still shows BLIS is off.
Old 05-12-2018, 06:37 PM
  #6  
Member
 
Robwatford's Avatar
 
Join Date: Jan 2018
Posts: 42
Likes: 0
Received 9 Likes on 6 Posts

Default

I had similar problems, my issue was that in the menu settings there is a master selection for BLIS when towing that needed to be turned on.

This isn't in the towing menu, I forget where right now, but trawl through the other menus and see if you can find it.

Once I turned that in my towing BLIS came on
The following users liked this post:
Ricktwuhk (05-13-2018)
Old 05-13-2018, 10:02 AM
  #7  
Junior Member
Thread Starter
 
NCost's Avatar
 
Join Date: May 2018
Posts: 11
Received 5 Likes on 5 Posts
Default

I should have mentioned that I have a 2018 F150 XLT. Those with Lariat and Above have a different menu system. BLIS is only in the Towing section for an XLT and is enabled in the trailer setup area.
The following users liked this post:
jlfliberty (02-10-2023)
Old 05-21-2018, 09:45 AM
  #8  
Junior Member
 
Scottsr3's Avatar
 
Join Date: Feb 2018
Location: Southwest Missouri
Posts: 7
Received 1 Like on 1 Post

Default

NCost, did you find a fix? I have an XLT also and having the same issue.
Old 05-21-2018, 03:28 PM
  #9  
Junior Member
Thread Starter
 
NCost's Avatar
 
Join Date: May 2018
Posts: 11
Received 5 Likes on 5 Posts
Default

No I haven't had my trailer hooked up since. I'm wondering if it turns off if the truck isn't in Tow/Haul mode (transmission). I'll post once I get it figured out.
Old 05-22-2018, 05:51 PM
  #10  
Senior Member
 
Bluewoo's Avatar
 
Join Date: May 2018
Location: Greensburg,PA
Posts: 517
Received 157 Likes on 113 Posts
Default

Same problem here so when I pick up my camper from shop I'll see if I can get it to work cause it didn't on my first tow.

Thread Tools
Search this Thread
Quick Reply: BLISS not working w/ Conv Trailer



All times are GMT -4. The time now is 10:47 AM.