2015 F150 Telescoping Tow Mirrors
#22
Member
My dealer has ordered Mirrors FL3Z-17682-AD and FL3Z-17683-AD to install on my XLT....it was part of the deal... and I was thinking on ordering the switch SW7441 to enable the power fold/extend. My mirrors are power/heated/signals now. Do you think the power fold/extend will work with the switched replaced?
Last edited by FreeAirHead; 10-20-2015 at 03:34 PM.
The following users liked this post:
cmillz13 (04-13-2020)
#23
Senior Member
My dealer has ordered Mirrors FL3Z-17682-AD and FL3Z-17683-AD to install on my XLT....it was part of the deal... and I was thinking on ordering the switch SW7441 to enable the power fold/extend. My mirrors are power/heated/signals now. Do you think the power fold/extend will work with the switched replaced?
I purchased a set of power fold/extend tow mirrors and the switch and have them installed, but the fold/extend function does not work. All my other functions, puddle, spot, heat, signal work fine as expected.
I'm early in my research on what to do at this point so I don't have a solution yet.
#25
FreeAirHead once the switch is replaced it should work no programming needed. The AD should be the correct ones for your XLT worked this forum after changing my King Ranch had problem getting correct part numbers from my dealer my truck took the AJ mirrors good luck
#27
Member
Thanks, The mirrors are in and the switch will be in tomorrow. The dealer is installing ( as part of the deal ) on Monday and I'll let you know how this works.
#28
Senior Member
Please let me know how this goes. Presuming your XLT did not have power fold from the factory, I'm guessing it won't work. If it does, I really need to figure out what I've done wrong. If he had to program something, I'd like to know what he did.
#29
Member
Now I need the correct 22 pin harness to make this conversion work. My dealer is looking into the correct harness to make this work. Does anyone happen to know the part number of the door harness???
Last edited by FreeAirHead; 10-26-2015 at 11:47 AM.
#30
Senior Member
There is a thread here about harnesses, but I don't recall a part number being given.
I would find the VIN for a well optioned truck and use that to search fordparts.com. If you give a VIN, it only returns parts for that VIN.
If you don't mind, next time you talk to your dealer, ask what the plan is for re-programming the truck. If he has a cheat sheet or directions for making it work, I could use that.
I would find the VIN for a well optioned truck and use that to search fordparts.com. If you give a VIN, it only returns parts for that VIN.
If you don't mind, next time you talk to your dealer, ask what the plan is for re-programming the truck. If he has a cheat sheet or directions for making it work, I could use that.