TunaSlayer Mod Progress
Senior Member
Joined: Dec 2010
Posts: 251
Likes: 6
From: Ocean View, NJ
Originally Posted by bobkyle2
Formerly "ZCHPRO"
Joined: Jul 2010
Posts: 1,950
Likes: 36
From: Chandler
Hmm, I'd have to look into them to figure them out. Getting power fit it would be easy but controlling it would be hard. They never offered it on ours I think only new SD have that option. At first I wanted to try it, but I thought about my situation more. I have to take a ferry to get off island and the crew always folds your mirrors in for you as you drive on past them. They would DEFINITELY fold these new ones in, and I could see it snapping crap and gear inside the mirror housing if they were powerfold. I'd save money and just get these Zach, they'd look badass on your truck too! Stand by for the write on installing these.
did you get them from the tasca guy or somewhere else?
Formerly "ZCHPRO"
Joined: Jul 2010
Posts: 1,950
Likes: 36
From: Chandler
Thread Starter
Offshore Poster
Joined: Nov 2010
Posts: 1,457
Likes: 4
From: Martha's Vineyard
Start out by removing the 2 screws at the bottom of the door panel.
Pop the rectangular cover on the door handle off. This exposes the 2 screws, remove them, then remove the handle unit.
Pop the cover with the window/lock controls off. Disconnect the harnesses.
Remove the one bolt here
Pop the speaker cover off.
Remove the 4 speaker screws
Disconnect the harness to the speaker
Take this rubber thing off and pull the 2 plastic tabs off
Pop the rectangular cover on the door handle off. This exposes the 2 screws, remove them, then remove the handle unit.
Pop the cover with the window/lock controls off. Disconnect the harnesses.
Remove the one bolt here
Pop the speaker cover off.
Remove the 4 speaker screws
Disconnect the harness to the speaker
Take this rubber thing off and pull the 2 plastic tabs off
Thread Starter
Offshore Poster
Joined: Nov 2010
Posts: 1,457
Likes: 4
From: Martha's Vineyard
The panel is ready to be removed. Pull up on it to do this.
Now remove the 3 nuts from the mirror bolts.
Disconnect the harness. The mirror isready to be removed. It just pulls off
Installed on passenger side vs standard mirrors.
Now remove the 3 nuts from the mirror bolts.
Disconnect the harness. The mirror isready to be removed. It just pulls off
Installed on passenger side vs standard mirrors.
Thread Starter
Offshore Poster
Joined: Nov 2010
Posts: 1,457
Likes: 4
From: Martha's Vineyard
Thanks Peller. The stars from the Rockstars are drying as I speak. Hopefully I can wash the truck enough to spray a rust protective undercoating on the undercarriage and wheel wells tomorrow.
