shorty mobile build
#31
Senior Member
Thread Starter
finalized what I want for the new exhaust setup-
muffler- magnaflow 14419 muffler 3inch in 3inch out
Y pipe- magnaflow 10778 dual 2.5 inlet 3 inch out
high flow cats- magnaflow 94106
tip- mbrp angled rolled end exhaust tip t5112 3.5 in 4 inch out
exit location- side exit before rear tire
spent several hours researching this
muffler- magnaflow 14419 muffler 3inch in 3inch out
Y pipe- magnaflow 10778 dual 2.5 inlet 3 inch out
high flow cats- magnaflow 94106
tip- mbrp angled rolled end exhaust tip t5112 3.5 in 4 inch out
exit location- side exit before rear tire
spent several hours researching this
#32
Senior Member
you did I usualy repost things I buy used untill I install them in case I have a chance to make money on them lol, They were not my first choice of wheel (couldnt pass up the deal) but now they are on there they are a permanent choice I love them. And I will be ordering toyo Mts again whenever I need tires, I am now a huge toyo fan
#34
Sounds like you have your exhaust figured out... can't wait to see/hear it... one thing to keep in mind with the exit before the rear tire is that its a PITA to keep that tire clean due to carbon from the exhaust... probably not a big deal with the black rims though.
I love the look of tips dumped before the rear tire. I just know that I'm **** about my tires/rims staying clean so I decided against it. You will really like the magnaflow setup. It sounds really good. I say good choice
I love the look of tips dumped before the rear tire. I just know that I'm **** about my tires/rims staying clean so I decided against it. You will really like the magnaflow setup. It sounds really good. I say good choice
Last edited by J. Clementi; 01-31-2012 at 01:15 AM. Reason: correcting the darn autocorrect
#35
Senior Member
Thread Starter
Ya I am tired of the one chamber and I really wanna go custom and you tube had some vids of the muffler I listed and it sounds perfect I think the exhaust change will be fantastic. For random info this would not be the first time I have changed from chambered to straight through on a modular motor and I would not be the first change to magnaflow either
#36
Senior Member
Thread Starter
the wife wants me to put step bars on (shes shorter Iam not) so these (in black) may have to find their way to the truck
http://www.4wheelparts.com/Side-Step...%2fBFN1970-S4B
http://www.4wheelparts.com/Side-Step...%2fBFN1970-S4B