OCMike's RCSB Guard Metallic 5.0 Build
#151
TOTM Sept. '18
Thread Starter
iTrader: (1)
Steve, (MDPhotographer)
That 2018 reverse socket has a much smaller diameter then the 2017 socket. The 2017 socket has a hole diameter of a little over an inch. The 2018 socket is 21mm or about 0.83". I haven't been able to find a 3156 socket that small yet. It also has 3 tabs that appear to be 3 different sizes.
Mike
That 2018 reverse socket has a much smaller diameter then the 2017 socket. The 2017 socket has a hole diameter of a little over an inch. The 2018 socket is 21mm or about 0.83". I haven't been able to find a 3156 socket that small yet. It also has 3 tabs that appear to be 3 different sizes.
Mike
Last edited by OCMike; 04-05-2018 at 10:39 PM.
#152
Senior Member
Steve, (MDPhotographer)
That 2018 reverse socket has a much smaller diameter then the 2017 socket. The 2017 socket has a hole diameter of a little over an inch. The 2018 socket is 21mm or about 0.83". I haven't been able to find a 3156 socket that small yet. It also has 3 tabs that appear to be 3 different sizes.
Mike
That 2018 reverse socket has a much smaller diameter then the 2017 socket. The 2017 socket has a hole diameter of a little over an inch. The 2018 socket is 21mm or about 0.83". I haven't been able to find a 3156 socket that small yet. It also has 3 tabs that appear to be 3 different sizes.
Mike
led fit?
#153
TOTM Sept. '18
Thread Starter
iTrader: (1)
Mike
#154
TOTM Sept. '18
Thread Starter
iTrader: (1)
Snapped off a quick picture this morning. I cleaned it up last night after a late winter snow storm on Wednesday.
Last edited by OCMike; 04-06-2018 at 08:51 AM.
The following 3 users liked this post by OCMike:
#155
This is one sweet ride, I'll be following!
The following users liked this post:
OCMike (04-06-2018)
#156
TOTM Sept. '18
Thread Starter
iTrader: (1)
The following users liked this post:
OCMike (04-06-2018)
#158
Senior Member
I'm enjoying following this build thread. Truck looks great. Well done.
The following users liked this post:
OCMike (04-07-2018)
#160
TOTM Sept. '18
Thread Starter
iTrader: (1)
I can't either..Just waiting for the weather to get a little better. Next weekend in the high 60s to low 70s.
Mike
Last edited by OCMike; 04-09-2018 at 12:22 AM.