My "Beast from the East" build
07-20-2013, 07:13 PM
#1
My "Beast from the East" build
So I decided to make a record here of my 88 F150 XLT Lariat 351 Windsor. Bought it a few months ago and just now really able to grt some work on it. Hopefully you guys enjoy it and I get some more advice on some things. Later I wilk post some projects I need/ want to do with it. For now here's a few pics for those who haven't seen it yet...
07-21-2013, 12:43 PM
#3
So far some minor things I've done is replace the oil pan plug bc the old one was stripped and leaking. Had to get a universal one to get it to fit. I also "misplaced" my keys so I had to replace my ignition lock cylinder instead of paying someone $200.00 to do it I spent $13.00 @ AutoZone. Wasnt to hard but time consuming.
07-23-2013, 11:38 PM
#5
Today I decided to work on my fuel issue. I ran seafoam through both tanks and changed the fuel filter. I also put in new headlights because my drivers side bulb was blown. All in all engine seems to be running smoothly with both tanks and was realatively cheap.
08-20-2013, 12:40 AM
#6
So I decided to put a "to do" list together.... ● = done
1. Replace ignition lock cylinder ●
2. Replace fuel filter ●
3. Clean up wiring
4. Replace rear main seal
5. Replace wiper blades
6. Clean coolant reservoir
7. Sea foam thru tanks ●
8. New head light bulbs ●
9. Plugs and wires/ tune up
10. Replace Brakes
11. Get new/ new to me tires
12. Replace parking brake cable
13. Check brake lines
14. Replace drivers side turn signal cover
15. Check brake booster hose
16. Fuel pump switch ●
17. Fix rear tank leak
18. Fix body dents/ rust
19. Replace oil pan plug ●
20. Fix tail gate ●
1. Replace ignition lock cylinder ●
2. Replace fuel filter ●
3. Clean up wiring
4. Replace rear main seal
5. Replace wiper blades
6. Clean coolant reservoir
7. Sea foam thru tanks ●
8. New head light bulbs ●
9. Plugs and wires/ tune up
10. Replace Brakes
11. Get new/ new to me tires
12. Replace parking brake cable
13. Check brake lines
14. Replace drivers side turn signal cover
15. Check brake booster hose
16. Fuel pump switch ●
17. Fix rear tank leak
18. Fix body dents/ rust
19. Replace oil pan plug ●
20. Fix tail gate ●
08-30-2014, 11:31 PM
#7
It's been quite awhile since I have been able to get much done on the beast. I changed the brakes and replaced the master cylinder. I put 4 "new to me" tires on it and cleaned out my coolant reservoir. My next project is replacing the ignition control module to see if it will fix my intermittent starting/ dying issue. Hoping to have it running strong by this winter.
Trending Topics
09-17-2014, 09:47 PM
#8
UPDATE: I took off my ignition control module a few nights ago with plans to replace it today. It ended up needing a very thin and deep 7/32 socket (gave me an excuse to purchase a new set of deep and short well sockets).
I finally bought a new ignition control module today but unfortunately the bolts are now missing (love my kids). I call the dealership and they told me the size is 4Mx.07x12mm. I went and got two new bolts from the local fastener shop but instead of a 7/32 head on it, it has 9/32 head (#crap!). Now the socket is to thick. Back the drawing board, either need new bolts still or a more thin 9/32 socket. Wish me luck.
I finally bought a new ignition control module today but unfortunately the bolts are now missing (love my kids). I call the dealership and they told me the size is 4Mx.07x12mm. I went and got two new bolts from the local fastener shop but instead of a 7/32 head on it, it has 9/32 head (#crap!). Now the socket is to thick. Back the drawing board, either need new bolts still or a more thin 9/32 socket. Wish me luck.
