Topic Sponsor
Members Builds See any build threads created by members to track progress of their projects.
Sponsored by:
Sponsored by:

My 2011 F150 build

Old 09-02-2013, 08:17 AM
  #11  
Blown Mafia
Thread Starter
iTrader: (4)
 
scobar's Avatar
 
Join Date: Nov 2011
Posts: 2,366
Received 105 Likes on 99 Posts

Default

Shoot for got this pic:


The previous owner:
  1. Lived on a gravel road
  2. Washed and did not dry this
  3. Drove through brush

Most if the scratches are out on the pass side, and most of the mineral deposits are gone from the roof.
Old 09-28-2013, 09:29 PM
  #12  
Blown Mafia
Thread Starter
iTrader: (4)
 
scobar's Avatar
 
Join Date: Nov 2011
Posts: 2,366
Received 105 Likes on 99 Posts

Default

Installed a lock actuator into the tailgate today. This will be handy.







Old 11-14-2013, 11:15 AM
  #13  
Member
 
saylor1322's Avatar
 
Join Date: Oct 2011
Location: SE Michigan
Posts: 107
Likes: 0
Received 12 Likes on 8 Posts

Default

[QUOTE=scobar;3000609]Installed a lock actuator into the tailgate today. This will be handy.

Ok, am I missing something here. In one picture you hooked up the green and blue wires, which Im assuming are the wired directly from the actuator, was this for a test? Then you hooked up the red and black back to the back of the truck? Also am I correct in assuming that the actuator does not need a ground or a direct power source? Sorry if these seem like basic questions but Ive done very little wiring Ive only hooked up a few systems back in high school and the lights I just put in my bed.
Old 11-15-2013, 11:25 AM
  #14  
Blown Mafia
Thread Starter
iTrader: (4)
 
scobar's Avatar
 
Join Date: Nov 2011
Posts: 2,366
Received 105 Likes on 99 Posts

Default

The red/black is plumbed from the door sill and ran to tailgate. The power comes from the door sil.
The following users liked this post:
2wheelin (09-05-2014)


Thread Tools
Search this Thread
Quick Reply: My 2011 F150 build



All times are GMT -4. The time now is 01:59 PM.