Kingofpasadena's 2018 RCLB build
#41
Senior Member
Thread Starter
STX grille showed up today, unfortunately with a rather large clip broken off. Any suggestions on the best way to fix it?
(Coincidentally, I also got a flyer for a new STX. lol)
#43
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Sux getting it like that after you doubt were excited about it. IMO, the best thing would be to contact the seller to make it right. I don't know how you'd repair that.
That's a good looking grille though.
That's a good looking grille though.
#44
Senior Member
Thread Starter
I'm thinking JB Weld. Fix doesn't have to be pretty since it's on the back side.
The following users liked this post:
johnday in BFE (08-16-2018)
#45
TOTM Sept. '18
iTrader: (1)
If you can't return it. I've had good luck on that type of plastic, since it won't show. Just make sure the broken part is in the right location. It won't come off without breaking it off in different spot.
The plastic bosses were cracked on the aftermarket LED tail lights, because of the heavy load resistor on the cover. I bought them I didn't find out until long after the return period was expired so used some of this to glue in some studs to hold the cover on. Ended up not using the resistor and doing a Forscan change so it wasn't required.
Mike
The plastic bosses were cracked on the aftermarket LED tail lights, because of the heavy load resistor on the cover. I bought them I didn't find out until long after the return period was expired so used some of this to glue in some studs to hold the cover on. Ended up not using the resistor and doing a Forscan change so it wasn't required.
Mike
Last edited by OCMike; 08-16-2018 at 02:05 PM.
#46
Senior Member
Thread Starter
If you can't return it. I've had good luck with this epoxy on that type of plastic, since it won't show. Just make sure the broken part is in the right location. It won't come off without breaking it off in different spot.
The plastic bosses were cracked on the aftermarket LED tail lights, because of the heavy load resistor on the cover. I bought them I didn't find out until long after the return period was expired so used some of this to glue in some studs to hold the cover on. Ended up not using the resistor and doing a Forscan change so it wasn't required.
Mike
The plastic bosses were cracked on the aftermarket LED tail lights, because of the heavy load resistor on the cover. I bought them I didn't find out until long after the return period was expired so used some of this to glue in some studs to hold the cover on. Ended up not using the resistor and doing a Forscan change so it wasn't required.
Mike
#47
TOTM Sept. '18
iTrader: (1)
Mike
#48
Senior Member
Thread Starter
One of my wheels showed up damaged and the seller offered to give me a partial refund or find me another wheel. I asked for another one because I didn't think it would be easy to match the finish. He never asked for the damaged one back, presumably because it wasn't worth the shipping cost. Now I have 5. lol
#49
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Shipping does suck. I sent a grille down to Mississippi last year, more than the grille sold it to him for. But you couldn't buy that grille, it was a custom piece combination of two grilles, he was happy though.
Good luck with the repair, hope it works.
Good luck with the repair, hope it works.