Kingofpasadena's 2018 RCLB build
#11
TOTM Sept. '18
iTrader: (1)
The following users liked this post:
Kingofpasadena (07-13-2018)
#12
Senior Member
The following 3 users liked this post by badwithcomputer:
#14
Senior Member
Thread Starter
(I mean, people used to drive cross country in VWs with 6V electrical systems, but these lights are pretty dismal for a modern vehicle. lol)
#15
Senior Member
Thread Starter
Ordered them on Sunday from Stage 3, got 'em Thursday. I was going to install them today until I realized that the one socket I needed was missing from my tool box and didn't have time to get to the hardware store. Should be able to knock 'em out tomorrow.
#16
Senior Member
Thread Starter
Clazzio seat covers installed. Kinda. Ran out of time/patience to do the middle one. Clips on the bottom of one of the headrest covers keeps popping open. Might just glue it. Tucking the bottom edges behind the plastic covers is a pain. Contemplated taking it to an upholstery shop and having them do the last 5% to make it look finished. lol
The following users liked this post:
OCMike (07-13-2018)
#17
Senior Member
Thread Starter
#18
Senior Member
Clazzio seat covers installed. Kinda. Ran out of time/patience to do the middle one. Clips on the bottom of one of the headrest covers keeps popping open. Might just glue it. Tucking the bottom edges behind the plastic covers is a pain. Contemplated taking it to an upholstery shop and having them do the last 5% to make it look finished. lol
#19
Senior Member
Thread Starter
DD SL1s installed! (Only the driver's side is installed in this pic for comparison, obviously.) I'll post up some before and after pics when it gets dark.
The following users liked this post:
OCMike (07-13-2018)
#20
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Pretty sure you're gonna like them. I did so much, I put them in the hi beams too.
The following users liked this post:
Kingofpasadena (07-13-2018)