johnday's 2017 build
#362
Village Sociopath
Thread Starter
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Gotcha!
#363
Senior Member
I like the looks of them, and they don't perform any worse than the OEM. I reused my OE bulbs, so, there's some room for improvement. LOL
I've run a few hundred miles in the rain with them, and there's no leaks. I'm sooner or later going to get some of the Diode Dynamics SL1's for Hi and Lo, from what I've read, those should help.
I've run a few hundred miles in the rain with them, and there's no leaks. I'm sooner or later going to get some of the Diode Dynamics SL1's for Hi and Lo, from what I've read, those should help.
#365
Village Sociopath
Thread Starter
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
And take a look at what Summers22 is doing, since both of you have the same color, you might get some ideas. His taste is very similar as well.
#366
Senior Member
Yea I’ve looked at summers build too. The spec d is the brand I plan on buying. Considering the sl1 led lights too.
Summers talked about the beam pattern on his seemed kinda off. And I believe those were not spec d.
Summers talked about the beam pattern on his seemed kinda off. And I believe those were not spec d.
#367
Village Sociopath
Thread Starter
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
No , his aren't SpecD, I can't recall what they are. He'll likely see this and let ya know.
#368
TOTM November 2019
iTrader: (2)
Trust me, they are made in the same factory as all of them, the front of them all say QIATANG where the Ford oval usually is. But yes, the beam pattern is different than OEM, but remember, I have LEDs, John is using halogens. I am very discerning, and if I didn't like them, they would be yanked.
The following users liked this post:
johnday in BFE (01-19-2018)
#369
Senior Member
Trust me, they are made in the same factory as all of them, the front of them all say QIATANG where the Ford oval usually is. But yes, the beam pattern is different than OEM, but remember, I have LEDs, John is using halogens. I am very discerning, and if I didn't like them, they would be yanked.
Okay, didn’t realize you were running led’s. Makes sense then.Not the least bit surprised that they are probably all made at the same place. That’s usually the case. Thanks for the info guys. Y’all are great.