jlundy

Strut install continued...........Note: I marked the Strut Mount orientation so I would know how to line up the new assy upper mounting studs, also the correct orientation of the lower Strut Mount will allow the Strut to lean inboard. So take that into account when building up the new assembly. As seen in the 2nd picture.


l

New Strut Mounts with Isolators Part Number FM1969 to build up the Bilstein Strut /Springs ahead of time for an easy remove and install. However they do not come with plastic molded dust boots like Factory mounts.



^^^^^Shot of the leveled Truck

jlundy

Next up is installation of AMP Research Plug and Play Powersteps with LEDS Part Number 76151-01A for 2015-2018 F150 ..............

Phil48315

I really like how far those steps come down !
If it wasn't for my truck sitting outside in the winter i would get a pair !

Man a set of wheels and tires would make your truck pop !

Pigman67

I was thinking the same thing......

jlundy

Yes, they come down far enough for a lifted Truck to utilize and be functional as well. I saw a video where they talked about them on a Truck in the Snow/Freeze belt that sits outside all winter and they haven't missed a beat, work like a champ.

They clean up the look of the Truck and tuck right up tight under the body. The LEDS give you some light and look cool at night when stepping onto them. You wire them into the OBDII in the truck so when any of the 4 doors are opened/Closed they activate along with the lights.

jlundy

Ok, up next are Wheels and Tires ...................Man you two are killing me.........I'm busting up over here.

jlundy

No rubbing or scraping with this set-up.





Flush with the factory Fender Flares

jlundy

Tire and Wheel installation Continued:
Cali-Off-road "Dirty" Wheels 20 x 9 +18 offset or 5.71" backspace Part Number 9104-2937M18 or 9104SB, Satin Black with Milling. Tires are Nitto Ridge Grapplers LT 295/60/20R Part Number 217170 all mounted and balanced with new TPMS sensors and Locking lug nuts shipped to my door from Mr. Wheel Deal.

kpromero

Are you keeping the FX4 decals? I am on the fence on keeping mine or not. Thought maybe some in a carbon fiber look but not sure

jlundy

I'm looking for a something else.....more transparent and I'm also looking for transparent small American flag to match if possible. But I need a little red to match the F150/ lariat badges.