Martian

@2018 lead foot, don't post pictures of your truck on someone else's build thread. That's why I deleted it the first time.

squidpocalypse

jlundy

Cool , thank you

almolah

Hello Jeff!

Awesome build! Have you by any chance installed AMP research Passthrough harness & Bypass switch for your PowerSteps?

Al

jlundy

Al, thanks for the compliment brother. To answer your question. I haven't installed the separate passthrough harness, it don't have any other OBDII needs at this time to require a splitter Or have I installed a override function switch yet as I have no real need. If I want to wash the steps I just stand on a step after closing the door they have a built-in override to keep them down. I don't do enough offroading to want them locked out over top of an obstacle.

carleycr

Hey Jeff. Good looking truck man. After reading through your build thread, I noticed your net lift in front was over 2.5". When you did you original measurements with factory wheels and suspension, was that from the ground to center bottom of fender or center of wheel to center bottom of fender? How many miles have you put on the new suspension? Any issues with CV angles?

I've only found one website that claims 2.75" max lift.

jlundy

I have since put a bunch of miles on this suspension in the tune of 35k. I drive this truck everyday, it is my only daily transportation. No CV angle issues. Measurement was from wheel centerline best I could line it up.