Here I go again..... FORD FOREVER!
#22
Senior Member
Thread Starter
Ran all wiring for amp, speaker, back up camera and capacitor under carpet but above the insulation. I also installed a 1" strip of weather stripping around the perimeter of all the doors.... MUCHO QUIET
#28
Senior Member
Thread Starter
Whoaaaaaaaa I caught this JUST IN TIME!!!! Somehow the back of the camshaft solenoid sensor came off and fell into the timing chain cover... The wire is all wrapped around one of the phasers and bent it.. There was another piece of gold metal wrapped with wire that was clanking around in there and broke a guide to pieces... Crazy part is the truck only did the start up rattle for like 2 or 3 seconds. I did however have a code that said camshaft position sensor BUT thats what ZFord calls the phasers
#29
Senior Member
Thread Starter
Sooooo it seems I need a cam and a valve rocker but I am still under budget so here goes
Need 1 valve cover and 2 lifters... Cam where wire was is worn a bit so he's outta there
Need 1 valve cover and 2 lifters... Cam where wire was is worn a bit so he's outta there
#30
Senior Member
Thread Starter
So new and shiny..... Sigh now I feel like I may as well order the other cam and full set of lifters and rockers to match... Oh well.... No rush