Gopherboy128's Dream Truck Build
#21
Senior Member
The following users liked this post:
HappyChappy (07-08-2019)
#22
'19 Lariat 3.5
Thread Starter
#23
'19 Lariat 3.5
Thread Starter
Installed my new Mishimoto intercooler today. Wasnt as bad as I thought, but definitely different from their video.
If I were doing it all over again- I would disconnect the cold-side elbow from the rubber boot. Couldnt push the cold side pipe back far enough to get the new, larger intercooler fed up into the slots. I did the install at my motel, on the ground lying under the truck. Also, on my 2019 the BOV harness has 2 plugs that hold the harness to the OEM intercooler and BOV. Nothing better than dropping the OEM one out and have it hanging up on a harness. Luckily, I was able to go in from the front of the truck with a long screwdriver and pry the retainers out. Also, HUGE weight difference between Mishimoto and OEM. Might consider having a helper. I didnt pay attentiion to how the bottom bracket that bolts to the frame was installed, and had it upside down when I finally got the Mishimoto unit up in place. Had to hold it one handed, and flip the plate around under the truck. But, it's installed and I am happy. Now just waiting on 5 Star Tuning and some time off to install my SPD pipes and Corsa cat-back.
If I were doing it all over again- I would disconnect the cold-side elbow from the rubber boot. Couldnt push the cold side pipe back far enough to get the new, larger intercooler fed up into the slots. I did the install at my motel, on the ground lying under the truck. Also, on my 2019 the BOV harness has 2 plugs that hold the harness to the OEM intercooler and BOV. Nothing better than dropping the OEM one out and have it hanging up on a harness. Luckily, I was able to go in from the front of the truck with a long screwdriver and pry the retainers out. Also, HUGE weight difference between Mishimoto and OEM. Might consider having a helper. I didnt pay attentiion to how the bottom bracket that bolts to the frame was installed, and had it upside down when I finally got the Mishimoto unit up in place. Had to hold it one handed, and flip the plate around under the truck. But, it's installed and I am happy. Now just waiting on 5 Star Tuning and some time off to install my SPD pipes and Corsa cat-back.
#24
Senior Member
Love the new head unit! Nice choice!
#25
'19 Lariat 3.5
Thread Starter
#26
'19 Lariat 3.5
Thread Starter
Installed SPD turbo adapters, SPD 3" Raptor downpipes, Corsa Resonator delete/X-pipe, and Corsa Raptor cat-back dual exhaust, with an F150 Limited bumper, and Raptor rear wiring harness.
The following 2 users liked this post by Gopherboy128:
BleedinFordblue (10-06-2019),
OCMike (06-16-2019)
#29
'19 Lariat 3.5
Thread Starter
The 5 Star 91 Performance tune is awesome as well. Want to get the exhaust working properly before I datalog and get it dialed in.
The following users liked this post:
Gopherboy128 (06-17-2019)