Go-on3 ' s build. ..
#171
music man
That is one beautiful F-150!!
Very tastefully done.
Very tastefully done.
#173
Senior Member
Thread Starter
The following 2 users liked this post by go-on3:
johnday in BFE (01-31-2020),
OCMike (01-31-2020)
#174
Senior Member
Thread Starter
The following 8 users liked this post by go-on3:
doug97gxe (09-15-2020),
Envious (02-03-2020),
ggunn9 (02-03-2020),
johnday in BFE (01-31-2020),
Johnny_bravo00 (01-31-2020),
and 3 others liked this post.
#175
Senior Member
Thread Starter
Here's some more updates as it's been awhile .... Alpine head unit, MTI tweeter pods,MTI sub enclosure with 2 JL Audio 12TW3's, JL Audio 700 5 amp, 2 sets of JL Audio ZR 650csi's. Entire cab and all doors sound deadened, 140 mph 8" cluster with Raptor style font , blacked out with red needles, Raptor steering wheel with harnesses by Boosted Grey Goose Designs, Raptor shifter boot, Snow LC50 Methanol injection controller, Raptor seat skins that were modified by shaving the Raptor logo, added carbon fiber leather accents with orange stitching to match Raptor wheel and boot
Last edited by go-on3; 09-01-2020 at 12:30 AM.
The following users liked this post:
johnday in BFE (09-01-2020)
#176
Senior Member
Thread Starter
Shaving the fenders 🤟
The following 3 users liked this post by go-on3:
#177
Senior Member
Thread Starter
Fabricated spare tire carrier... Designed it to be quick release and removes in seconds ! Tire location is elevated to provide more room for storage and modified the factory cleat brackets, and installed aluminum bins to hold fuel jugs of E85 for convenience for road trips
The following users liked this post:
johnday in BFE (09-01-2020)
#178
Senior Member
Thread Starter
Fabricated rear diffuser extensions.
The following 3 users liked this post by go-on3:
#179
Senior Member
Thread Starter
Grille project... grafting a Focus RS grille to a XLT Grille and shaving the RS logo. After grafting the Focus face bar I decided to try to make grill function like how the original Grille's come from the factory... I ended up cutting up the Facebook from the XLT Grille and grafting to Focus facebar so that all the tabs would be there and snap into the Grille base like factory
The following 2 users liked this post by go-on3:
johnday in BFE (09-01-2020),
Johnny_bravo00 (09-01-2020)
#180
Senior Member
Thread Starter
The following 2 users liked this post by go-on3:
johnday in BFE (09-01-2020),
Johnny_bravo00 (09-01-2020)