Frankentruck and other oddities from Firerunner's World
#561
Tommy
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
If I ever get around to taking a vacation (hopefully next week) I've got everything I need to FINALLY get the 360 cameras wired up. I've been planning a week off for a month now, but one of our drivers discovered he has cancer & has been out getting treatment so I've been pinch-hitting so to speak on his route.
#562
Member
If I ever get around to taking a vacation (hopefully next week) I've got everything I need to FINALLY get the 360 cameras wired up. I've been planning a week off for a month now, but one of our drivers discovered he has cancer & has been out getting treatment so I've been pinch-hitting so to speak on his route.
#565
Tommy
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
I'll get my prices together for you when I get off of work.
I don't feel comfortable giving a answer to this until I get my system installed. Once I do that I'll have a better grasp on what you can and can't do first hand.
I don't feel comfortable giving a answer to this until I get my system installed. Once I do that I'll have a better grasp on what you can and can't do first hand.
#566
Member
Cool man. Good luck with the install. We’ll be standing by.
#567
Tommy
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
The front camera, harness, brackets, washer jet, hoses, misc. screws, etc. was around $180.00
I purchased a roll of shielded wire for $50.ish, a couple of connectors for $2.00+/- a piece, and a roll of connector terminals for $12.00+/-
The IPMB was purchased used from eBay & I found it for $149.00
In my case, I already had the rear camera from the factory & when I upgraded my mirrors they already were equipped with cameras so I didn't have that expense in the budget (lol, like there is such a thing!) for this particular mod
I purchased a roll of shielded wire for $50.ish, a couple of connectors for $2.00+/- a piece, and a roll of connector terminals for $12.00+/-
The IPMB was purchased used from eBay & I found it for $149.00
In my case, I already had the rear camera from the factory & when I upgraded my mirrors they already were equipped with cameras so I didn't have that expense in the budget (lol, like there is such a thing!) for this particular mod
#568
Senior Member
iTrader: (1)
The front camera, harness, brackets, washer jet, hoses, misc. screws, etc. was around $180.00
I purchased a roll of shielded wire for $50.ish, a couple of connectors for $2.00+/- a piece, and a roll of connector terminals for $12.00+/-
The IPMB was purchased used from eBay & I found it for $149.00
In my case, I already had the rear camera from the factory & when I upgraded my mirrors they already were equipped with cameras so I didn't have that expense in the budget (lol, like there is such a thing!) for this particular mod
I purchased a roll of shielded wire for $50.ish, a couple of connectors for $2.00+/- a piece, and a roll of connector terminals for $12.00+/-
The IPMB was purchased used from eBay & I found it for $149.00
In my case, I already had the rear camera from the factory & when I upgraded my mirrors they already were equipped with cameras so I didn't have that expense in the budget (lol, like there is such a thing!) for this particular mod
The following users liked this post:
Firerunner (04-20-2018)
#570
Tommy
Thread Starter
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts