When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wouldn't you know it!! Today I get deliveries from UPS (replacement SE LED headlights I purchased from Mudder) & USPS (Painted ovals I purchased from mbulluck) & can't install either because of this......
I'm doing the same thing here with my 2016 XL on fender flares ... could you share on what size drill bit or bits you used.
Thanks for your info.
-Dave
Dave, unfortunately I really dont know what size it was. I do remember that I compared bits to the clips that went into the holes, and chose one that was a little smaller than the widest point on the clip
Remember though it's better to go smaller at first, because if you start to big there is no going back!
Dave, unfortunately I really dont know what size it was. I do remember that I compared bits to the clips that went into the holes, and chose one that was a little smaller than the widest point on the clip
Remember though it's better to go smaller at first, because if you start to big there is no going back!
03-08-2018, 09:02 PM
lol sooo I went with these...
