Eco-BEAST Build Thread
#961
Junior Member
Not really sure which to go with. I haven't done too much research between the two different series. What are your thoughts? I'm also interested in those camburg uppers you have on your rig. What's the advantages of that as well?
#962
Just here for the MPG's
Thread Starter
As far as the Camburg UCA they have better then stock geometry to allow the suspension to droop out more. I believe that the 1.5 uni will net you ~1.25" of droop over stock bringing your new total suspension travel in the front to ~9. If you look up fellow member "WarSurfer" he has a thread on mid travel and what each component does.
#963
Junior Member
Thanks for the input man! Appreciate it. One more quick question, what's the upside of the rds bar? What's the difference? Clearly by now you can tell I haven't done my research. Ha.
#964
Just here for the MPG's
Thread Starter
One is curved and one is straight lol Since now you can get the E Series in Hyperspot pattern the only difference is the RDS is curved and throws more light to the sides. If money was no object I'd go RDS for the "wow" factor but since I don't live in fantasy land, price is a factor haha
#965
Junior Member
Hmmm.. Maybe I'll switch to drinking a cheaper beer (I drink coors and that's damn cheap already ha) for awhile and pull the plug and get a lightbar. Where is your switch for the lights located? I don't remember if you posted a picture of that or not. Very interested to see where a good location to put my switch will be.
#966
Just here for the MPG's
Thread Starter
Hmmm.. Maybe I'll switch to drinking a cheaper beer (I drink coors and that's damn cheap already ha) for awhile and pull the plug and get a lightbar. Where is your switch for the lights located? I don't remember if you posted a picture of that or not. Very interested to see where a good location to put my switch will be.
#967
Senior Member
I could have swore I sub'd to this thread.. Anyway love your truck. Last time I looked at your build it still looked like the pic at the bottom of your sig lol. I got some catching up to do.
#968
Member
Hey man Im back,
I completely forgot this last time.
Ive had 20x9 Pro Comp 7031s on my rig too, and one of the screws for a centercap went astray so i had to take it off before I lost it. Where did you find replacements for the ones stolen?
I completely forgot this last time.
Ive had 20x9 Pro Comp 7031s on my rig too, and one of the screws for a centercap went astray so i had to take it off before I lost it. Where did you find replacements for the ones stolen?
#969
Just here for the MPG's
Thread Starter
I would post a link to the exact site but i noticed that i don't think any of them are vendors here so ill just say go to your "preferred search engine" and type in "pro comp 7031 center cap". It will run you about $10 w/ shipping. I have since taken all four of mine off and painted the inside part to match the rim because I've burned through about 3 of them now and i break them way too much. The look of having them removed however, is actually growing on me quite a bit.