Custom Through bedside exhaust
#1
2004 single cab 5.4 build
Edit: Originally just my exhaust post but changed to an ongoing build thread. I love this little truck and have some big plans. Stay tuned!
So here is the low down on the exhaust. I did pace setter long tube headers, coated and wrapped, vband connection to magnaflow high flow cats, 2.5" stainless with piecut bends, h pipe just before SLP Loudmouth resonators, then some snakey bendy action up over the frame, another vband connection, size up to 3in, bendy, out the bedside. sound clip can be found here,
exit
3in bendy
2.5in bendy with vbands
bendy over the frame
loud thingys
where you goin
vband mini meows
really loud thingy
So here is the low down on the exhaust. I did pace setter long tube headers, coated and wrapped, vband connection to magnaflow high flow cats, 2.5" stainless with piecut bends, h pipe just before SLP Loudmouth resonators, then some snakey bendy action up over the frame, another vband connection, size up to 3in, bendy, out the bedside. sound clip can be found here,
exit
3in bendy
2.5in bendy with vbands
bendy over the frame
loud thingys
where you goin
vband mini meows
really loud thingy
Last edited by 310knifeco; 10-21-2018 at 09:44 AM.
#2
TOTM Sept. '18
iTrader: (1)
New member, long time reader. Just finished up my custom exhaust and had to share it with people that will appreciate it! Major PITA installing long tube headers but I got it done. Also pie cut exhaust, takes foreeeeeever. So here is the low down. 2004 single cab 5.4. I dont know what this truck is going to become, so lets start with exhaust. I did pace setter long tube headers, coated and wrapped, vband connection to magnaflow high flow cats, 2.5" stainless with piecut bends, h pipe just before SLP Loudmouth resonators, then some snakey bendy action up over the frame, another vband connection, size up to 3in, bendy, out the bedside. sound clip can be found here, sound clip.
exit
3in bendy
2.5in bendy with vbands
really loud thingy
exit
3in bendy
2.5in bendy with vbands
really loud thingy
Edit: Listened to the video...Yep it's loud!
Mike
Last edited by OCMike; 10-19-2018 at 08:48 PM.
The following users liked this post:
OCMike (10-19-2018)
#4
TOTM Sept. '18
iTrader: (1)
Trending Topics
#8
#9
Senior Member
Did you purge all that piping? You have more patience then me for doing all that for an exhaust, but good for you bud. If you have access to a machine with pulser give it a shot helps alot with heat control on that thin tubing.
#10
welds were done on pulse, which is new to me, still trying to get that 100% figured out.