When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
OK, here are the part numbers for the upfitter switches
over head console HL3Z-28519A58-JD this is for a black, power slider, NO MOONROOF, NO ENHANCED SECURITY. If you have other options, or a different color, then you’ll have to search for the correct console part number.
Plug for the back of the upfitter switches 4U2Z-14S411-MB This plugs into the back of the console for the switches, There is a harness available from ford, but I just made my own harness, was a lot cheaper since I had plenty of wire to make a harness
Under hood wiring and fuse/relay box HC3Z-14A303-F the wiring from the above plug get extended to this box, this is where the switches get their power. This also has the main power and switched power leads to run the box. Again, the thread above should have all the info on this
If if anyone is wanting to do this, and is near Jacksonville, FL I’m happy to help get it done.
Last edited by CrankCase; 11-05-2018 at 12:57 PM.
Reason: Added thread link reference
Oh, forgot about these two mods.
Roush intake and borla exhaust.
The exhaust is just a single in and single out muffler, with dual black tips. It sounds really nice, has a good sound when accelerating and down shifting, but absolutely no drone on the highway.
I really like the look of your truck. Do you have any pictures of the exhaust from underneath? I'd like to see how it routs around the frame and the leaf springs. I have the 2017 157" wheel base and can't see anything on the Borla web site like it for my truck
I really like the look of your truck. Do you have any pictures of the exhaust from underneath? I'd like to see how it routs around the frame and the leaf springs. I have the 2017 157" wheel base and can't see anything on the Borla web site like it for my truck
Here you go
Its a custom install, using a Borla muffler. I’m not sure if the exact type, it might say in my invoice.
It is a single in and single out, to a dual set of tips.
Hope this helps
Thanks for the pictures. That's what I figured it would have to be real close to the front spring shackle. I live in South Florida and I saw a truck very similar to yours with the same dual exhaust tips. It look real nice and sounded nice as well.
Thanks again
So I finally got my RTR grill.
This grill is awesome! Fit and finish is top notch, it lines up perfectly with all the factory body lines and hood. The color is an exact match to the OE plastic pieces on the front bumper.
It has some LED strips in the “nostril” section which are super bright. They come with plugs to plug inline with the factory headlIghts, but I wired them to a keyed source under the hood so they were on when the truck was on, like the outline in the headlights, no matter if the headlights are on or not.
A cool feature is when the lights are off, the outline is blacked out.
Here are the lights on
I am very happy with the grill. Now just waiting on the rest of the RTR stuff to become available.
what keyed source did you use to have them stay on ?
I used fuse #15 in the under hood fuse box. It controls the front camera and headlight leveling on the raptor according to the owners manual....neither of which I have so no extra load is placed on the fuse.
Today I got my RTR fender flares on. Quality is awesome, right there with the grill. The flares are smooth vs a textured finish like the grill. They install without drilling any holes and use factory fasteners and some wicked strong double sided tape to adhere at the fender. Should keep them from rubbing the paint like some other flares do. Time will tell.
Heres a couple crappy garage pics, will get some better ones this week
11-05-2018, 12:46 PM
