Build Thread for my Ruby-Red, Coyote powered, 2013 FX2 Sport
#151
The LEGATO system is only appx $500 while my BORLA system was appx $1100 & BORLA is highly rated/recommended for its "quality" & the difference in the appearance/thickness of the Piping is a HUGE. Another note, while the LEGATO does have low grade Stainless Piping, it does NOT have a Stainless Muffler! BORLA is Stainless everything & a very high quality of same... It's a u get what u pay for thing!
Last edited by FXtreme5.0; 12-15-2018 at 03:27 PM.
The following users liked this post:
johnday in BFE (12-15-2018)
#152
On 11-11-18, I finally had the Gear Swap done & Detroit TrueTrac installed.
Well today the Gears/TrueTrac had their 500 mile checkup & they got a perfect bill of health
I also had this awesome Diff. Cover installed, since the shop was pulling the cover & made another Trans adjustment.
Well today the Gears/TrueTrac had their 500 mile checkup & they got a perfect bill of health
I also had this awesome Diff. Cover installed, since the shop was pulling the cover & made another Trans adjustment.
Last edited by FXtreme5.0; 01-25-2019 at 11:51 PM.
The following users liked this post:
johnday in BFE (01-26-2019)
#153
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Nice! Looks pretty heavyduty, good addition.
The following users liked this post:
FXtreme5.0 (01-26-2019)
#154
Well, I am finally a part of the FORScan club & have made my first changes successfully
I was able to successfully install 2 changes that I absolutely love.... Bambi Mod & increased the TurnSignal Flashes from 3 to 5 signals.
However, I am very disappointed that there are so very few changes which can be made to my 2013 F150
Getting ready to start on the Wife's 2016 Fusion, which is exciting, because there appears to be a lot of changes we can make!
Thank You to everyone who worked very hard putting all of those Tutorial's together
Update
I was able to make several changes to the wife's 16' Fusion... the Bambi-Mod, increased Turn-Signal Flashes, activated Tire Pressure display/values, activated Remote Start dash controls (added Remote Start previously with add-on Module). Next I am going to enable the
Side-Mirrors to Tilt downward when placed into Reverse (just found this mod).
.
I was able to successfully install 2 changes that I absolutely love.... Bambi Mod & increased the TurnSignal Flashes from 3 to 5 signals.
However, I am very disappointed that there are so very few changes which can be made to my 2013 F150
Getting ready to start on the Wife's 2016 Fusion, which is exciting, because there appears to be a lot of changes we can make!
Thank You to everyone who worked very hard putting all of those Tutorial's together
Update
I was able to make several changes to the wife's 16' Fusion... the Bambi-Mod, increased Turn-Signal Flashes, activated Tire Pressure display/values, activated Remote Start dash controls (added Remote Start previously with add-on Module). Next I am going to enable the
Side-Mirrors to Tilt downward when placed into Reverse (just found this mod).
.
Last edited by FXtreme5.0; 02-12-2019 at 02:40 PM.
The following users liked this post:
johnday in BFE (02-01-2019)
#155
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Cool, not too far behind you. Got everything I need, but warmer weather and courage. Those two mods you just did are at the top of the list.
The following users liked this post:
FXtreme5.0 (02-02-2019)
The following users liked this post:
Firerunner (02-21-2019)
#157
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Remote start is something I'll never be without again. I always had it on my wifes last three cars, but never for myself, until this truck. Really like it at subzero temps and heated seats. Sure you're gonna like it too this summer.
#159
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
Ya, forgot where you were!!!
#160
After considering it for awhile, I finally decided to replace my stock Air-Box (equipped w/a K&N air filter) with a high flow replacement from JLT, which is a small American Co. The JLT is not real pretty like a S&B or Volant, but it produces the most actual HP gains of any other I could find. In fact it "requires" a custom Tune, due to the massive 4" diameter Tube. However, I am lucky as my SCT Tuner already has the provisions for it, all I had to do was select the JLT CAI then reprogram. Time will tell how much I like it, but I swear the Truck likes it. However, I will advise if you're considering one, it's very LOUD. The kids & I like it, the wife not so much...lol
The following users liked this post:
johnday in BFE (03-01-2019)