Build Thread for my Ruby-Red, Coyote powered, 2013 FX2 Sport
#141
Finally got those rusted Valve Cover Bolt's all replaced, but at a cost of appx $160 for 28 new Bolt's
I think FORD should reimburse me, cheap *ss crap! This is a low mileage, rust free, southern Truck. Only good news is that I was able to get them all out without breaking any off. Only the bottom 6 on each side were the worst & while a 10 mm socket is supposed to fit them, it required a 9 mm & even an 8 mm at times, tapped on w/a hammer to get them off
I think FORD should reimburse me, cheap *ss crap! This is a low mileage, rust free, southern Truck. Only good news is that I was able to get them all out without breaking any off. Only the bottom 6 on each side were the worst & while a 10 mm socket is supposed to fit them, it required a 9 mm & even an 8 mm at times, tapped on w/a hammer to get them off
Last edited by FXtreme5.0; 11-17-2018 at 07:39 PM.
#144
BTW everyone, my OEM Sport Steering Wheel is For-Sale
https://www.f150forum.com/f59/oem-fo...-wheel-431458/
Click on Link above for details ^^^
WHEEL HAS BEEN SOLD
https://www.f150forum.com/f59/oem-fo...-wheel-431458/
Click on Link above for details ^^^
WHEEL HAS BEEN SOLD
Last edited by FXtreme5.0; 12-07-2018 at 11:30 PM. Reason: Wheel has already been Sold.
The following users liked this post:
WildThing792 (08-07-2019)
The following users liked this post:
WildThing792 (08-07-2019)
#147
Recently just added a really sweet Mod, IMO... Custom Painted Emblem's Post 3 of 3
https://www.ebay.com/str/fastshipno1
The custom Ruby-Red & Matte-Black paint job was done by Tim (see his store Link above). Now, you won't see a Rear Emblem painted like mine on his web-site, BUT ask & you shall receive! After running my idea by Tim, he graciously accepted my challenge & boy, did he deliver!
https://www.ebay.com/str/fastshipno1
The custom Ruby-Red & Matte-Black paint job was done by Tim (see his store Link above). Now, you won't see a Rear Emblem painted like mine on his web-site, BUT ask & you shall receive! After running my idea by Tim, he graciously accepted my challenge & boy, did he deliver!
Last edited by FXtreme5.0; 12-08-2018 at 12:04 AM. Reason: Added a Link to where I purchased Emblems
#148
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,528
Received 10,073 Likes
on
6,507 Posts
All I can say is, I hope mine looks that good after 5 years. Really like that front end. Well done.
#149
That Tremor Grille completely changed the Trucks appearance. Then you add in all the small things like tinted lights & color matching Emblems..... Voila, an instantly eye catching difference from the norm'
P.S... I am SURE your Truck will still look "brand new" but "custom" after 5 years, I love your ideas
The following users liked this post:
johnday in BFE (12-08-2018)
#150
Expert main pipe
Well, I installed the BORLA S-Type on Friday & then helped a friend move Saturday, so I got to spend a good deal of time listening to it. Honestly it does sound good, but its so much quieter than my LEGATO was, I hope I can get used to it. I will say, while I liked how loud the LEGATO was, I did not like the raspy sound when the throttle was stabbed & the BORLA does NOT do that at all. The BORLA has a very smooth growl throughout the entire RPM curve & zero Drone
I should also mention, the quality of the BORLA system is immediately apparent in comparison. The pipe seems heavier (high-quality 300-series stainless steel that's almost completely resistant to corrosion and discoloration) the Muffler, Resonator & Piping are all Stainless (the LEGATO does NOT have a Stainless Muffler)!
My one complaint with quality in the BORLA system is that the Tip's are NOT double-wall
I think the raspy sound is gone with the BORLA because they also use a Resonator & the LEGATO does not (probably also why it's not as loud). I am hoping the BORLA may get a little louder over time, as there's a packing material inside their Muffler & Resonator
My LEGATO system was loud & while I like that, I didn't think my very close neighbors in our new neighborhood would (lol). Plus, I really wanted the Black-Tip's & dumping straight out the back will be good now, as I don't want condensation blown on my new garage wall.
Pic's to follow
I should also mention, the quality of the BORLA system is immediately apparent in comparison. The pipe seems heavier (high-quality 300-series stainless steel that's almost completely resistant to corrosion and discoloration) the Muffler, Resonator & Piping are all Stainless (the LEGATO does NOT have a Stainless Muffler)!
My one complaint with quality in the BORLA system is that the Tip's are NOT double-wall
I think the raspy sound is gone with the BORLA because they also use a Resonator & the LEGATO does not (probably also why it's not as loud). I am hoping the BORLA may get a little louder over time, as there's a packing material inside their Muffler & Resonator
My LEGATO system was loud & while I like that, I didn't think my very close neighbors in our new neighborhood would (lol). Plus, I really wanted the Black-Tip's & dumping straight out the back will be good now, as I don't want condensation blown on my new garage wall.
Pic's to follow