Andrewdod's 2015 XLT Sport Build Thread
Alright guys, I picked up this 2015 XLT 5.0 4x4 Sport package yesterday after my 2013 STX was totaled out by the insurance company. I'm super excited about this truck! I've already got about 350 dollars in mods/parts coming for this one that should be showing up in the next few days. So here is a quick breakdown of my plans for this one. These will for sure change, but these are my immediate plans for this build.
Interior: Husky Floor liners Auovo Anti dust mats (cup holders, console, glovebox, door trim panels, etc.) Katzkin Leather interior sync 3 Exterior: 6 inch ProComp suspension lift. 35x11.5R20 Nitto Terra grapplers (Off the 2013) 20inch +1 offset Fuel Triton's (off the 2013) Tint the front windows to match the rears with a 5% brow on the windshield (I have an appointment for this tomorrow.) Black Anzo Outline projector headlights Husky Rear Wheel Well Liners 6 inch .50 Cal Stubby antenna (off the 2013) Putco 98651 Window trim painted Tuxedo Black Fox 2.0 Coilovers and Rear Shocks Morimoto XB fog lights Full LED exterior light swap AVS Seamless Ventshade Visors paint match the grille and bumper trim. (I love the xlt sport grille and have no desire to swap it like others have) Performance: Some kind of dual side exit exhaust. (not sure yet I didn't think my magna flow on my last truck was loud enough.) K&N Cold Air intake SCT Tuner. (who tunes it is up in the air, will probably be the flavor of the month at the time.) House Keeping: Going to have the hood repainted not happy with how the hood looks right now. There are paint runs, and dirt nibs all over it. There is no evidence of a collision, or any other paint work on the truck. However my assumption is the hood probably had some very bad scratches in it and the PO took it to a shade tree shop for paint work before he turned in his lease. The painters at my work have already looked at it and they are down to fix it. Spray in bedliner, the truck currently has no sort of bedliner in it and the bed has scratches all over. PDR the truck has 2 or 3 dings that I want to have taken out. I will do this once the truck doesn't go into Philadelphia everyday because I'm sure it will get a few more before I'm done there. Remove the hideous front valance (I've already done this, In my opinion a very dumb design by ford. It would scrape a speed bump it hangs so low.) 2 new rear door trims. Don't know how i missed these when i bought it... the right side is really scratched up, and the left has a small hole in the speaker grate. Here's a few pics of the new ride! The day i signed the papers https://farm2.staticflickr.com/1874/...35021c57_k.jpg https://farm2.staticflickr.com/1850/...cd3690f7_k.jpg https://farm2.staticflickr.com/1871/...bec4b0f6_k.jpg Yesterday after I brought it home https://farm2.staticflickr.com/1872/...6611c7a1_k.jpg https://farm2.staticflickr.com/1871/...c35d600e_z.jpg https://farm2.staticflickr.com/1892/...0324174e_k.jpg Today pulled off all the dealer lettering and free advertisement and removed the loser valance https://farm2.staticflickr.com/1862/...c0bd4902_k.jpg Filled the holes left from the valence with these https://farm2.staticflickr.com/1886/...eea0d131_k.jpg Here's how it looks without the valance https://farm2.staticflickr.com/1893/...137c8031_k.jpg |
WooHoo!!! Been waiting for this one to start. This is going to be fun. Congrats on the new truck.
|
Originally Posted by KillinTime
(Post 5908148)
WooHoo!!! Been waiting for this one to start. This is going to be fun. Congrats on the new truck.
|
Yea, the hood would drive me crazy too. Hopefully, your shop can squeeze you in somewhere and get it done pretty soon.
|
$3K for the lift sounds crazy, but then again there's a lot of work involved. Are you doing upgraded shocks or struts with it?
For the exhaust, are you looking for obnoxious or just slightly wild? I went with a Cherrybomb Glasspack swap in place of the muffler (12" length) and left the resonator. It's not as loud as I want so I'm thinking I'm going to install an electronic cutout before the resonator, and do an axle dump with no mufflers or anything on it. That way when I'm coming home or leaving at late/early hours I'm not pissing my neighbors off as bad. Lol |
Originally Posted by tareed94
(Post 5908513)
$3K for the lift sounds crazy, but then again there's a lot of work involved. Are you doing upgraded shocks or struts with it?
For the exhaust, are you looking for obnoxious or just slightly wild? I went with a Cherrybomb Glasspack swap in place of the muffler (12" length) and left the resonator. It's not as loud as I want so I'm thinking I'm going to install an electronic cutout before the resonator, and do an axle dump with no mufflers or anything on it. That way when I'm coming home or leaving at late/early hours I'm not pissing my neighbors off as bad. Lol |
Congrats on the new truck! I have heard of several paint issues from ford out of the factory. My guess is painting aluminium is a bit different than steel.
|
Nice truck, looking forward to seeing the progress
|
Originally Posted by KillinTime
(Post 5908267)
Yea, the hood would drive me crazy too. Hopefully, your shop can squeeze you in somewhere and get it done pretty soon.
Originally Posted by tareed94
(Post 5908513)
$3K for the lift sounds crazy, but then again there's a lot of work involved. Are you doing upgraded shocks or struts with it?
For the exhaust, are you looking for obnoxious or just slightly wild? I went with a Cherrybomb Glasspack swap in place of the muffler (12" length) and left the resonator. It's not as loud as I want so I'm thinking I'm going to install an electronic cutout before the resonator, and do an axle dump with no mufflers or anything on it. That way when I'm coming home or leaving at late/early hours I'm not pissing my neighbors off as bad. Lol As as far as exhaust goes.... I want it to party when I romp on it, but be chill when I’m cruising. I thought the last set up was just a little to chill.
Originally Posted by Somd FX4
(Post 5909231)
Congrats on the new truck! I have heard of several paint issues from ford out of the factory. My guess is painting aluminium is a bit different than steel.
Originally Posted by 5POINTOH
(Post 5909327)
Nice truck, looking forward to seeing the progress ��
|
Got the front windows tinted out yesterday. Also added a brow on the windshield. Front windows are 15% and the strip is 5%. Still deciding whether I want to make the rear windows darker. https://cimg5.ibsrv.net/gimg/www.f15...b5b3f104d.jpeg https://cimg6.ibsrv.net/gimg/www.f15...27d4eb163.jpeg https://cimg9.ibsrv.net/gimg/www.f15...8d50c9923.jpeg https://cimg8.ibsrv.net/gimg/www.f15...8b34b5550.jpeg https://cimg0.ibsrv.net/gimg/www.f15...155770bf5.jpeg |
All times are GMT -4. The time now is 03:55 PM. |
© 2024 MH Sub I, LLC dba Internet Brands