2018 Lighting Blue Supecrew by Gingrbredman
#161
TOTM Sept. '18
iTrader: (1)
Mike
#162
Senior Member
Well shoot didn't know I was that close to any members. Thought John was the closest to me and he's about 3 hours. I'm from Saint Joseph MI pretty close to you Mike. I'd say within 45 mins it's a small world. I actually bought my truck from the same dealership you did. Rolling Prarie is a little closer we have friends we visit down there.
Last edited by NukeWelder; 08-17-2018 at 07:58 PM.
The following users liked this post:
OCMike (08-17-2018)
#163
Senior Member
Thread Starter
Patience, and finding the right guy, have paid off. Had a box of parts waiting for me to put on the truck this weekend. Gotta say, MBullock doesn't mess around! The time put into these, the knowledge he has to make every detail shine, and the results are all just amazing!
There may be a few finger prints already in this pic cause I couldn't put them down, but the detail is amazing. The paint matches perfect, and if you look close, even the outside black ring and the little square for the camera washer are done.
Didn't have a ton of time to get good pics on the truck, this weekend was crazy busy with family stuff, but had to get them on and show them off!
There may be a few finger prints already in this pic cause I couldn't put them down, but the detail is amazing. The paint matches perfect, and if you look close, even the outside black ring and the little square for the camera washer are done.
Didn't have a ton of time to get good pics on the truck, this weekend was crazy busy with family stuff, but had to get them on and show them off!
The following 3 users liked this post by gingrbredman:
#164
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,264 Likes
on
2,183 Posts
Those are awesome! It's hard to find any paintwork better than mbullocks
The following users liked this post:
gingrbredman (08-27-2018)
#165
Senior Member
Thread Starter
Also got my fender badges on....
These take a little getting used to because they kind of blend in, then they are kinda seen. But I am liking the no chrome so far
These take a little getting used to because they kind of blend in, then they are kinda seen. But I am liking the no chrome so far
The following 2 users liked this post by gingrbredman:
johnday in BFE (08-27-2018),
OCMike (08-27-2018)
#166
Senior Member
Thread Starter
And while I was at it, had these little guys painted. Don't need them, can't see them most of the time, but kinda like the little pop of blue when I open the truck door.
The following users liked this post:
johnday in BFE (08-27-2018)
#167
Senior Member
Thread Starter
The following users liked this post:
johnday in BFE (08-27-2018)
#168
Village Sociopath
iTrader: (1)
Join Date: Jun 2014
Location: Nowhereville Barton City Michigan
Posts: 28,517
Received 10,052 Likes
on
6,499 Posts
Both you and Mike pay attention to detail, very fine job on both of you. You're making me want to give Mike some more money!
Looks great!
Looks great!
The following users liked this post:
gingrbredman (08-27-2018)
The following users liked this post:
gingrbredman (08-27-2018)
#170
Senior Member
Thread Starter
Thanks Jon! Still have a few more parts in his hands that took a little longer for me to get to him. B pillars and the Putco window trim pieces are next.