2017 Lariat 2wd
#42
Senior Member
Thread Starter
I need to touch up the bottom bar and the black a bit, but a nice visual update.
Next is finishing audio rebuild, anzo and HID low beams, then finally the 2/4 maxtrac kit and viking shocks/coilovers.
Last edited by tjcaustin; 02-26-2019 at 05:03 PM.
#44
Senior Member
Thread Starter
I'll probably try it and see once I get more of that color in. Since it's plastidip, it won't be difficult to remove if it doesn't work. I'm thinking about doing the wheels and maybe calipers in that color, too.
#45
TO THE MOON 204K/239K
Wow that grille really sets if off!
#46
Senior Member
Thread Starter
#47
Senior Member
Thread Starter
Before:
After:
New anzo projectors with 55w HID low beams. Too bad I didn't pay attention and get the right canbus ballast or flicker harness or whatever. They worked fine on ACC when I tested, but turn off almost immediately when engine is running. Now to get the right part in and then 3/5 lowering kit from VAS with viking shocks/coilovers.
After:
New anzo projectors with 55w HID low beams. Too bad I didn't pay attention and get the right canbus ballast or flicker harness or whatever. They worked fine on ACC when I tested, but turn off almost immediately when engine is running. Now to get the right part in and then 3/5 lowering kit from VAS with viking shocks/coilovers.