2016BoostedGreyGoose's XLT Sport Build, Yeah Finally
#341
Leds in the low beams only. This was to be temporary but I really, REALLY like these Lil Anzos. Lol. The LEDS are very nice for the Anzos.... if I knew I would like them this much I would have perhaps gone HID in hi and low beams. As it stands I have anothe set of LEDS that I may install in the hi beas but since I don't drive alot, especially at night, I may not and just sell them.
The following users liked this post:
leonoe (08-08-2017)
#343
cost is relatively low because I got a great deal on the gear from AutoAnything. They are awesome!
In order to clean the wiring up, I bought all my own connectors and extensions because it seemed like a money grab from other places selling kits with stuff I didn't need with a final look like most others, so I did my own thing. Saved money and I think cleaned up the look of the wiring.
Last edited by 2016BoostedGreyGoose; 08-08-2017 at 08:29 AM.
The following users liked this post:
Husker (08-08-2017)
#344
Senior Member
iTrader: (1)
Leds in the low beams only. This was to be temporary but I really, REALLY like these Lil Anzos. Lol. The LEDS are very nice for the Anzos.... if I knew I would like them this much I would have perhaps gone HID in hi and low beams. As it stands I have anothe set of LEDS that I may install in the hi beas but since I don't drive alot, especially at night, I may not and just sell them.
My lowbeam hotspot is way too low and not up near the cutoff like HID. I MAY, actually change the projector to the new Morimoto LED once it's out.
The led in the high is pretty worthless IMO.
#345
like I said, I don't do a lot of driving, but this set up is superior to the stop halogens, imho. While I agree with you, I like what I have. It's easy enough to switch out later to if ever I decide to, but unless your just a lighting purest, these led are just fine. I'm not pushing them on anyone. Just a few more shares from my build.
#346
Senior Member
iTrader: (1)
like I said, I don't do a lot of driving, but this set up is superior to the stop halogens, imho. While I agree with you, I like what I have. It's easy enough to switch out later to if ever I decide to, but unless your just a lighting purest, these led are just fine. I'm not pushing them on anyone. Just a few more shares from my build.
Coming from a Jeep I had 7" Trucklite headlamps and they were AMAZING! I drive a lot in the dark and it's all country roads. Not sure if you saw but a Deer ran into the side of my truck Friday
Lighting by me is important - no street lighting.
Is it better than stock? Yes.
Is worth the update? Yes.
Worth the money? Yes.
Easier than HID? Yes.
It's all subjective to what everyone's taste is really.
#347
Oh I know.
Coming from a Jeep I had 7" Trucklite headlamps and they were AMAZING! I drive a lot in the dark and it's all country roads. Not sure if you saw but a Deer ran into the side of my truck Friday
Lighting by me is important - no street lighting.
Is it better than stock? Yes.
Is worth the update? Yes.
Worth the money? Yes.
Easier than HID? Yes.
It's all subjective to what everyone's taste is really.
Coming from a Jeep I had 7" Trucklite headlamps and they were AMAZING! I drive a lot in the dark and it's all country roads. Not sure if you saw but a Deer ran into the side of my truck Friday
Lighting by me is important - no street lighting.
Is it better than stock? Yes.
Is worth the update? Yes.
Worth the money? Yes.
Easier than HID? Yes.
It's all subjective to what everyone's taste is really.
Last edited by 2016BoostedGreyGoose; 08-08-2017 at 09:02 AM.
#348
Senior Member
Overall, I am EXTREMELY pleased. No regrets. I did go my own route with wiring. Again, most that I saw was just out of control with wires visible everywhere!
Sealed up with black RTV
LED low beam driver mount
Comparison
Switch back turn signal LED bulb perfectly matches the projectors in the Anzos, both in color and shape/design/looks
Before splice to install LED outline switchback pigtail, driver side
After LED pigtail splice for outline switchback
Passenger side switchback outline LED pigtail
Sealed up with black RTV
LED low beam driver mount
Comparison
Switch back turn signal LED bulb perfectly matches the projectors in the Anzos, both in color and shape/design/looks
Before splice to install LED outline switchback pigtail, driver side
After LED pigtail splice for outline switchback
Passenger side switchback outline LED pigtail
The following users liked this post:
2016BoostedGreyGoose (08-12-2017)
#349
***** Who needs *****
...... when ipad! lol Havent been posting much but still very much so working on my build. Will be giving up my very special to me, knurled ***** of my 502a FCIM bezel, however it is in favor of a mini iPad4. Will be able to monitor all engine parameter, wife can play games, watch movies...and a few other planned things. The ipad in the pic is not the one that will be installed..its only being used so I could share how it will look in the dash. After I am finished modifying this bezel with an ambient light on the bottom, flocking (or neoprene where the iPad will sit) and paint, I will post more pics and info.
#350
Senior Member
iTrader: (1)
...... when ipad! lol Havent been posting much but still very much so working on my build. Will be giving up my very special to me, knurled ***** of my 502a FCIM bezel, however it is in favor of a mini iPad4. Will be able to monitor all engine parameter, wife can play games, watch movies...and a few other planned things. The ipad in the pic is not the one that will be installed..its only being used so I could share how it will look in the dash. After I am finished modifying this bezel with an ambient light on the bottom, flocking (or neoprene where the iPad will sit) and paint, I will post more pics and info.
The following users liked this post:
2016BoostedGreyGoose (08-25-2017)