2016 Platinum FX4 Magnetic Gray
The following users liked this post:
DeltaNu1142 (07-07-2017)
#132
Flaccid Member
Thread Starter
Thanks--I think the front looks good, but I don't like the profile or 3/4 view. The front fender liners & crash bars with that new bumper look unfinished. It'd be great if I could find some pocket fenders that would cover that area.
#134
Flaccid Member
Thread Starter
7/8/2017
10,xxx miles
I replaced the keypad in the driver side door trim. I thought all this time that the clip was broken; in fact, it was just missing a small metal piece that had fallen into the door when I last pulled it out. It was a huge pain to remove & replace.
I also found a small spot of surface rust on the new bumper. I sanded it down, cleaned it, and sprayed it with satin black paint.
I took inventory of the parts I need to install my grille. I'm missing only one black plastic stud retainer, and thanks to @Firerunner, I should have it soon. Here's a preview:
Satin black mesh and trim; the rest is Magnetic Metallic.
10,xxx miles
I replaced the keypad in the driver side door trim. I thought all this time that the clip was broken; in fact, it was just missing a small metal piece that had fallen into the door when I last pulled it out. It was a huge pain to remove & replace.
I also found a small spot of surface rust on the new bumper. I sanded it down, cleaned it, and sprayed it with satin black paint.
I took inventory of the parts I need to install my grille. I'm missing only one black plastic stud retainer, and thanks to @Firerunner, I should have it soon. Here's a preview:
Satin black mesh and trim; the rest is Magnetic Metallic.
The following users liked this post:
lbckevin (12-31-2020)
#135
Flaccid Member
Thread Starter
7/14/2017
10,666 miles
I got home from a work trip today and tackled the grille/ACC radar module relocation install. Literally everything that could go wrong, did, but I got it in. I haven't tested the ACC yet. I'll be adding details to that thread at some point.
10,666 miles
I got home from a work trip today and tackled the grille/ACC radar module relocation install. Literally everything that could go wrong, did, but I got it in. I haven't tested the ACC yet. I'll be adding details to that thread at some point.
#136
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
10/29/16
2,750 miles
I installed my dash cam, with a temporary power cable. I was going to wait until I had the right fuse tap, but I've had a funny feeling driving around without the camera for the past few weeks... like something is going to happen, but I won't be able to capture it. It's an odd dependence.
2,750 miles
I installed my dash cam, with a temporary power cable. I was going to wait until I had the right fuse tap, but I've had a funny feeling driving around without the camera for the past few weeks... like something is going to happen, but I won't be able to capture it. It's an odd dependence.
The following users liked this post:
DeltaNu1142 (08-14-2017)
#138
Flaccid Member
Thread Starter
I received these today, for the license plate and reverse lights:
I'll install when I get home. I'm also expecting Bilstein 5100 rear shocks tomorrow.
I'll install when I get home. I'm also expecting Bilstein 5100 rear shocks tomorrow.
#139
Flaccid Member
Thread Starter
8/14/2017
11,245 miles
I installed the license plate lights today. I'm not sure yet where I'll put the reverse bulbs. I found a killer deal on a rear bumper to match the Fab Fours front bumper... I may just have to pull the trigger on that.
EDIT: Looks like I'm putting the bulbs back in the mail... there are a lot of places on these forums that reference 921 bulbs as reverse bulbs. That's incorrect; the right size is 3156.
11,245 miles
I installed the license plate lights today. I'm not sure yet where I'll put the reverse bulbs. I found a killer deal on a rear bumper to match the Fab Fours front bumper... I may just have to pull the trigger on that.
EDIT: Looks like I'm putting the bulbs back in the mail... there are a lot of places on these forums that reference 921 bulbs as reverse bulbs. That's incorrect; the right size is 3156.
Last edited by DeltaNu1142; 08-14-2017 at 08:55 PM.
The following users liked this post:
dicktracy09 (11-14-2018)
#140
Flaccid Member
Thread Starter
8/16/2017
11,359 miles
I filled up today from near empty. $73.27 in 87 octane.
Also... I did this today. Torqued to 66 ft-lbs with no Loctite. Thanks to Autoplicity for the deal on Bilstein 5100s for the rear. I'll be coming back to you for fronts when the time comes. On the short drive through town tonight, the difference was clear. People say these are firmer than stock, and that might be true... but a lot of bumps and irregularities on this route I'm used to feeling, I didn't even notice with the new shocks. I'm very pleased.
11,359 miles
I filled up today from near empty. $73.27 in 87 octane.
Also... I did this today. Torqued to 66 ft-lbs with no Loctite. Thanks to Autoplicity for the deal on Bilstein 5100s for the rear. I'll be coming back to you for fronts when the time comes. On the short drive through town tonight, the difference was clear. People say these are firmer than stock, and that might be true... but a lot of bumps and irregularities on this route I'm used to feeling, I didn't even notice with the new shocks. I'm very pleased.
The following users liked this post:
Autoplicity (08-17-2017)