2016 F150 4x4 SuperCrew XLT 2.7 EcoBoost Build
#121
Senior Member
That is unless you evacuated up my way and we still had 12" over the 5 or 6 day period there!
Hope everything was okay for you and your family.
The following users liked this post:
leje0306 (01-01-2018)
#122
Senior Member
#124
Senior Member
#125
Senior Member
Yep, we got lucky & had no flooding, so she got a full wash & quick wax 2 weekends ago.
#128
Removed the front valance today. I've seen some people remove it completely, leaving tabs and unsightly holes, while others have left it on and trimmed it down a bit. I decided I wanted it completely off, with no tabs or holes visible.
So here it is, as it came from the factory. Some like it, I personally don't.
Next I popped it off. Much better, but still the tabs hung down and there were 8 holes that needed to disappear.
Took a razor knife to the tabs, sliced through them like butter.
Now, to deal with those pesky and unsightly holes, I went to the hardware store and pick up some plastic push gromets.
Much better!
So here it is, as it came from the factory. Some like it, I personally don't.
Next I popped it off. Much better, but still the tabs hung down and there were 8 holes that needed to disappear.
Took a razor knife to the tabs, sliced through them like butter.
Now, to deal with those pesky and unsightly holes, I went to the hardware store and pick up some plastic push gromets.
Much better!
The following users liked this post:
TX_hornedfrog (10-30-2017)
#129