Ford F150 Forum - Community of Ford Truck Fans

Ford F150 Forum - Community of Ford Truck Fans (https://www.f150forum.com/)
-   Members Builds (https://www.f150forum.com/f78/)
-   -   2015 Super Crew Lariat 5.0, ownership log (https://www.f150forum.com/f78/2015-super-crew-lariat-5-0-ownership-log-373713/)

white15 02-21-2017 12:21 AM

2015 Super Crew Lariat 5.0, ownership log
 
7 Attachment(s)
Last November, I totalled my daily driver and after an exhausting search for a truck, I settled on this one. It's a 2wd, 2015 F150 Lariat 501A, chrome package, towing package and 18" wheels. It has the 5.0, 6-speed auto with 3.55 gears. It's actually fairly quick for stock truck. I'm going to add my touch to it as time goes on.

Attachment 484517

Oh and I call it, Pegasus.

Attachment 484518

6000 mile update

I've made a few observations in two months of ownership and I'll list then expand on each.

1] Ride stability and quality - This thing rides great on decent roads and handles like a truck should. However uneven expansion joints, rough transitions, big dips or any bump in a curve is enough to upset the rear end. Think snap oversteer in our SN95's and you get the picture. It also bounces several times after a big dip, enough to bounce my head off the head rest. Kind of unsettling really, the roads here are well terrible at best in places and I consider this a liability.

Fix - Did some research on the subject and it's a well documented issue. Ford 'under valved' the shocks and has yet to release a TSB but no one has died as a result so... Enter a pair of Bilstein 5100 shocks for the time being. Soon, I will be installing a Belltech 3/5.5 lowering kit complete with sport struts/shocks.

2] Driving Impression- It effortlessly blends into traffic and has no problems as a daily driver. At low throttle take offs the 1-2 shift feels sorta vague but if you really stand in it, the TiVCT shifts [VTEC KICKS IN YO] and she really moves. Any speed under 60 mph? She kicks down to 2nd gear, it's a riot. Truly. In fact, I really think this truck would've whipped my PI swap car with it's 2.73's.

3] Interior/Creature comforts - The heated/cooled leather seats are comfortable but not 'too cushy' and it doesn't lead to fatigue. Period. The steering wheel is nicely padded, hand stitched leather and has cruise/phone/radio controls evenly spaced. The remote start has paid for itself a few times. The ambient lighting it a nice touch and helps locate the cup holders in the dark. I've only added the WeatherTech floor mats thus far but intend to do a few more things sooner or later.



Had the front windows tinted with Suntek Carbon 18% to match the rear:

Attachment 484519

Attachment 484520

Attachment 484521

The aforementioned Bilstein 5100's:

Attachment 484522

Attachment 484523

SCT X4 tuner with MPT tunes and JLT cold air intake......installation pending delivery

white15 02-21-2017 06:06 AM

https://cimg9.ibsrv.net/gimg/www.f15...629ebbad2.jpeg
https://cimg5.ibsrv.net/gimg/www.f15...fbce109f0.jpeg
https://cimg8.ibsrv.net/gimg/www.f15...32a6f4d75.jpeg

Changed all of the exterior lighting to LEDs

white15 02-21-2017 06:07 AM

https://cimg8.ibsrv.net/gimg/www.f15...545e0198e.jpeg

Added some FoMoCo rear wheel well liners

https://cimg6.ibsrv.net/gimg/www.f15...a5c865490.jpeg

Added a MBRP side exhaust

https://cimg7.ibsrv.net/gimg/www.f15...c1fdc04c9.jpeg

Replaced the stock Michelin’s with some Toyo Proxes STIII’s

white15 02-21-2017 10:28 AM


white15 02-21-2017 10:29 AM


white15 03-19-2017 12:42 PM


white15 06-01-2018 12:58 PM

The shocks that came with the belltech setup left a lot to be desired. This weekend they were swapped out for a set of Bilstein 5125 series shocks. The ride is now firmer but more controlled, which was what the Belltech shocks were lacking. My longer term goals include a pair of Viking D220’s and helper bags with a custom crossmember to mount each.




Safety first!! It’s so much easier to work on a truck!




The Bilstein’s required 1/2 hardware and the truck came supplied with 12mm hardware. This necessated I drill out one side of the mounts to fit the shank of the 1/2 bolt. The threads fit the 12mm side without issue. All hardware was upgraded to Grade 8 and properly torqued within an inch of its life.




The u-bolts are long enough support a set of traction bars...hmm...








white15 08-12-2018 10:27 PM

I had my bumpers wrapped in a gloss white vinyl this weekend. The mirrors and door handles will be re-done in white in the near future. I'm also considering having the roof wrapped black.

https://cimg7.ibsrv.net/gimg/www.f15...67c9f8388.jpeg
https://cimg6.ibsrv.net/gimg/www.f15...1b130d6e7.jpeg

white15 08-12-2018 10:28 PM


KillinTime 08-12-2018 10:48 PM

Looking pretty slick. I love the PTM items.


All times are GMT -4. The time now is 05:26 PM.


© 2024 MH Sub I, LLC dba Internet Brands